1 / 4
Mitutoyo 8in/200mm Caliper Stand with Attachment Bolt — zdjęcie 1
1 / 4

Mitutoyo 8in/200mm Caliper Stand with Attachment Bolt

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I added a hole for a 10-32, 10-24, or M5 Flat head screw to hold the Holder to Base while glue sets.

Ocena
0 / 5
Polubienia
2
Pobrania
16
Wydruki
0
Wyświetlenia
126
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

A stand for 8in and/or 200mm Mitutoyo digital calipers.  It has an added hole sized for a 10-32, 10-24, or an M5x.8 flathead screw.  I recommend using the screw to clamp the parts together while your glue of choice sets up rather than relying on the screws mechanical connection by it's self. 

I printed with supports under the pocket in the back of the "Holder".

Tagi