Fanatec F1 Wheel Spacer to equalize wheel distance to podium hub wheels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fix the distance of the Fanatec F1 wheel between the wheel base and the driver.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 101
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
All of my wheels use a podium hub and QR2, which makes them all the same distance between me and the wheel base. Only the Fanatec F1 wheel has the shifter paddles attached directly to the wheel and skips the podium hub by directly connecting to the QR2.
That results in less distance between wheel and wheelbase and more distance between driver and wheel, which bothered me.
So I made this 2 piece adapter that fits between the QR2 (outer spacer) and the connector pins (inner spacer).
You need longer replacement bolts to use with the spacers.
They should be (please check before you mod, I can't verify anymore):
M5 x 45mm cap screws
https://www.amazon.de/-/en/dp/B0BQCBB3N5?th=1
M4 x 55mm cap screws
https://www.amazon.de/-/en/dp/B0BNJZRXZ4?th=1
I printed this with PLA or PETG (can't remember exactly, probably PLA) with 80% cubic infill.
I tested sturdiness using Fanatec Control Panel > Steering Wheel > Force Feedback Test.
Obviously, I can't guarantee that your print will endure your FFB. I use a Podium DD1.
