Logitech K400+ Battery Cover with Dongle Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement battery cover with dongle case for a Logitech K400+ wireless keyboard
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 68
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Logitech K400+ Battery Cover with Dongle Case
The cover is for the Logitech K400 plus. This is a remix modified easily with Tinkered to add a dongle case or slot to store the usb receiver.
Print instructions
This is meant to be printed with a slightly flexible filament - PETG recommended. PLA may work, but the front hooks are pretty flimsy and may have a lower life.
The model is easiest to print on the flat back surface, though this means the mounting hooks print in the weakest layer orientation. In this orientation the print requires no support structures.
Material: PETG
Resolution: 0.006 recommended
Nozzle: 0.4mm
Layer height: 0.12mm
Wall loops: 3