V-ION BTT Eddy probe Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple conversion of the V-ION Cartographer ducts to fit the BTT Eddy (Duo) Current Probe instead.
- Ocena
- 1 / 5
- Polubienia
- 7
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 266
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Current status:
I have this mod running on my Virtu E3 for a few weeks now. Homing works reliably, but the tap functionality via eddy-ng ( https://github.com/vvuk/eddy-ng ) is unfortunately still a bit wonky.
This is most likely caused by a mix of the BTT Eddy's mixed reliability, and the mount not being on the perfect height.
The current iteration has worked on my printer for the last few days, but i need to let it run through a bunch more work cycles first before i can really call it done.
What it does:
The goal of this mod is to make the budget-friendly BTT Eddy (Duo) probe available on the V-ION toolhead, without loosing any build space.
Since my main goal while designing this was to minimize the loss of potential buildspace over everything else, there was no way to keep the casing.
Due to the compact size of this mount, zero buildspace is lost!
You only loose the ability to scan a roughly 10mm strip on the left side of the bed.
What you need:
Other than two M3 screws there is no further mounting hardware needed, as they screw directly into the plastic.
I recommend crimping a custom cable for this mount, as the stock btt eddy usb cable might be a bit too thick to fit down there without loosing some X travel.
Want a budget hotend mount too? Here's a link to my V-ION TZ V6 mount: