1 / 2
Minthia AWP — zdjęcie 1
1 / 2

Minthia AWP

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

CynthiAWP but mini

Ocena
0 / 5
Polubienia
21
Pobrania
14
Wydruki
0
Wyświetlenia
226
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Outdoor Toys
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Cynthia AWP but smol
Avg 125 fps with 21cm worker barrel and 15cm K31
Bolt grip is a little wobbly under higher load, might be better with a thicker bolt.

Standard hardware; bunches of M3 screws, 110mm plunger tube, 10/32 or 10/24 1.75 inch screws and nuts, pen springs, ~20mm of threaded rod for trigger linkage. 
Optional - 
- printed bipod - https://www.printables.com/model/321956-bipod-for-picatinny/remixes
- printed foregrip - https://www.printables.com/model/897896-hardware-free-vertical-foregrip-picatinny
- printed scope - https://www.printables.com/model/870621-nerf-scope-nstrike-and-picatinny-versions
- printed short mag - https://www.printables.com/model/142900-suret-mag-nerf-half-darttalon-magazine
- rival round glued to plunger head

Tagi