Simple Wall Mounted Clothing Bar
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Begone, messy chair – A simple wall mounted solution for worn-not-yet-dirty clothes.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 39
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial
Build this simple wall mounted clothing hanger from two holders and a wooden round rod.
Materials List
2x bar holder (or more for more stability)
4x 4mm screw ( two per bar holder)
wooden round rod
Printing
Print the hangers lying on the side. Mine printed fine without supports. I added some modifiers to set the infill to 100% around the screw holes (see the .3mf file).
Gyroid infill at 20% worked fine for me.
Customization
I uploaded .stl files for three standard round rod sizes from the hardware store; the distance to the wall is 8cm. You can customize these dimensions in the Fusion file:
rod_diameter
wall_distance
tolerance
upper_screw_diameter
lower_screw_diameter
The holders printed in PETG with a tolerance of 1mm fit rather tight; depending on your printer and type of rod you may want to change that value.