Simple Wall Mounted Clothing Bar
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Begone, messy chair – A simple wall mounted solution for worn-not-yet-dirty clothes.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 10
- Makes
- 0
- Views
- 39
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution — Noncommercial
Build this simple wall mounted clothing hanger from two holders and a wooden round rod.
Materials List
2x bar holder (or more for more stability)
4x 4mm screw ( two per bar holder)
wooden round rod
Printing
Print the hangers lying on the side. Mine printed fine without supports. I added some modifiers to set the infill to 100% around the screw holes (see the .3mf file).
Gyroid infill at 20% worked fine for me.
Customization
I uploaded .stl files for three standard round rod sizes from the hardware store; the distance to the wall is 8cm. You can customize these dimensions in the Fusion file:
rod_diameter
wall_distance
tolerance
upper_screw_diameter
lower_screw_diameter
The holders printed in PETG with a tolerance of 1mm fit rather tight; depending on your printer and type of rod you may want to change that value.