Prusa XL Back Hexagon Honeycomb PFTE Tube Guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shortens the travel and turns of the filament from spool to extruder.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 263
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Many users have encountered issues where certain filaments become brittle in the high-friction serpentine filament tubes. These guides are designed to shorten the travel of filament in the tubes and eliminate 2 turns of the filament.
The PFTE tubes are now 34" and have only 1 sharp turn, as opposed to 52" and 3 turns.
The spools are now placed back of or below the printer.
The model has a firm insert tab. You may need to file this a little and firmly press to insert. It adds rigidity.
I have always had the side sensors turned off. This design does not move or replace those sensors. You need to have those sensors turned off in settings. I have also replaced the tubes with 4mm (outer) 2.5mm (inner) to further reduce friction. Original tubes have an inner diameter of 2mm.