1 / 1
Prusa XL Back Hexagon Honeycomb PFTE Tube Guide — image 1

Prusa XL Back Hexagon Honeycomb PFTE Tube Guide

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Shortens the travel and turns of the filament from spool to extruder.

Rating
0 / 5
Likes
8
Downloads
15
Makes
0
Views
263
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Many users have encountered issues where certain filaments become brittle in the high-friction serpentine filament tubes. These guides are designed to shorten the travel of filament in the tubes and eliminate 2 turns of the filament.

The PFTE tubes are now 34" and have only 1 sharp turn, as opposed to 52" and 3 turns.
The spools are now placed back of or below the printer.

The model has a firm insert tab. You may need to file this a little and firmly press to insert. It adds rigidity.

I have always had the side sensors turned off. This design does not move or replace those sensors. You need to have those sensors turned off in settings. I have also replaced the tubes with 4mm (outer) 2.5mm (inner) to further reduce friction. Original tubes have an inner diameter of 2mm.