Gate Safety Sensor Post Cap | Rectangular Steel Profile End Cap (60x40 mm) | Post Lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Public Domain
Functional Post Cap & Weather Shield for Gate Safety Sensors
A practical top cap / lid specifically designed for rectangular steel profiles (60x40 mm rectangular steel profiles with a 1.8–2.0 mm wall thickness) used as posts for automatic gate safety sensors (photocells, presence detectors, or smart home sensors).
The sloped pyramid design acts as a weather shield, preventing rain, snow, and debris from pooling on top of the post and running down into the sensor's enclosure. It provides a clean, professional, and flush finish to your automated gate installation while protecting the internal electronics.
Print Settings:
Material:** ASA or PETG are highly recommended for outdoor usage due to UV and weather resistance. PLA is fine for indoor or temporary testing.
Infill: 15-20% (Gyroid or Grid)
Supports: Support on build plate only.
Important for ABS/ASA: If you print with ABS/ASA, an enclosure is required to prevent warping. Due to material shrinkage, it is recommended to scale the model to 101% in your slicer to ensure a perfect, snug fit onto the steel profile.