Love Rose Script: Elegant Wall Art / Sign color
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An elegant and modern 3D printable "Love" script sign integrated with a beautiful stylized rose. Perfect for wall decor
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 30
- Wydruki
- 1
- Wyświetlenia
- 91
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
Welcome to the Love Rose Script Sign, an elegant 3D printed wall art piece that combines a fluid script font for the word "Love" with a stylized rose stem.
This design features a black text body and stem with intricate white-accented leaves and a striking red rose bloom. It is perfect as a gift, for Valentine's Day, or to add a touch of modern romance to your living space. The flat design makes it easy to mount on any wall.
This model was originally designed in Tinkercad and is optimized for a seamless multi-color printing experience using a simple filament swap at specific layers, requiring no painting!
Recommended Print Settings
For the best and easiest multi-color result, please follow these recommendations:
Material: PLA or PETG (PLA recommended for decorative use).
Infill: 15% - 20% is sufficient.
Perimeters: 3 for optimal definition.
Layer Height: 0.2mm (use 0.16mm for sharper detail on the white lines).
Supports: No Supports Needed! This is designed to print flat and clean.
Multi-Color Printing Instructions (Filament Swap)
This model can be easily printed in two or three colors using standard slicer features for filament pauses/changes at specific layer heights.
For the 3-Color Look (Black, White, Red):
Start your print with White filament for the intricate leaf details.
Set a filament swap at around layer height ~0.6mm-1.0mm (adjust to clear the line details) to switch to Black for the main text and stem.
Set another filament swap at a layer height to transition from the stem into the rose head (e.g., at ~2.0mm-2.4mm) to switch to Red.
Alternatively: If you have a multi-material system (like AMS or MMU), you can color-paint the model in your slicer directly.
Post-Processing & Mounting
No assembly required – print in one piece!
Mounting: Use small pieces of double-sided mounting tape (like 3M Command Strips) on the flat back surface for clean, hole-free wall placement.
I would love to see your color combinations and finished prints in the review section! Enjoy!