Longboard Truck Risers Valkyrie cast
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Longboard Truck Risers Valkyrie cast
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 50
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Standard Digital File License
Angle wedge risers for Valkyrie cast trucks with 50 degree baseplate.
These risers follows the shape of the truck base, so they looks better and have a minimal impact on truck height. They are also made in the shape of a sector of a circle, rather than a right angle triangle like all other risers, so they stack together without protrusions. The bolt holes have additional internal cutouts for easier installation of bent bolts.
These trucks have assymetrical baseplate bottom so pay attention for + and - risers, they are not the same and should not be reversed.
0dg 3mm - flat riser could be scaled to any height in slicer.
Print in TPU 95A or 60D
0.2 layer hight (0.4 nozzle)
3/3/3 Walls/Top/Bottom
100% Infill
0.1/0.1 Fuzzy Skin