Creality K1 Max PTFE Guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
K1Max PTFE guide
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 157
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Custom PTFE guide for the Creality K1 Max, this will guide a PTFE tube and fit well.
Or u can like me drill a small hole in the side panel so u dont have to move the filament sensor and still have a good flow for ur filament (at ur own risk, drill carefully and slowly).
Anyway this is a good PTFE tube guide that mounts on the side using the original screw holes, its an easy 45minutes print and uses 11,26gram of filament, printed using 0.4 nozzle 0.2layer and 15% infill without supports, the side gets hot so best printed in PetG.
Little update; this fixed my flow problems that i had since i started using this printer in combination with some other mods that where already installed.