Pool hose/pipe holder 5 cm/2 inch (Bestway/Marimex/Intex) for small printbeds
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pool hose / pipe holder 5 cm / 2 inch ( Bestway / Marimex / Intex ) for small printbeds
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 284
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Open Community License v1
*Image note: the pool is on a very uneven surface, so it looks less optimal, tho it still works as intended as you can see in the before and after images. On the before, sprays over the water. In the after, it stays contained.
Pool hose / pipe holder 5 cm / 2 inch ( Bestway / Marimex / Intex ) for small printbeds
Simple pipe holder to keep the hose more straight, which adds relieve to the strain of the liner material and keeps the water outlet below the water on models where the water outlet is on the top instead of the bottom.
It also has a hook to easy attach and detach when needed.
Great for those that use the same hose on the optional INTEX LED pool sprayer.
Every edge which might interact with the hose is smoothed out to reduce friction.
There are many good options out there, but very few were printable on the smaller Prusa Mini(+), which are 180mm x 180mm x 180mm, so I made my own.
You can save additional weight and filament by lowering the shell perimeter.
I only set it to 5 because it had to be stronger due to kids playing around and it, which made the print almost 30% heavier.
Print with the most UV resistant filament you can find.
I had PETG on hand so I choose that.
Print with tree support to get the least amount of support scarring!
Modeled in Onshape