Liczymy pasujące modele…
A desktop vise for holding small items such as printed circuit boards, models, small parts for assembly, etc. The jaws have a maximum opening of 50mm (about 2 inches). Printable in the orientation shown with no supports. Although the…
50mm net cup for hydroponic plants. Print Settings Printer Brand: FlashForge Printer: Creator Pro Rafts: No Supports: No Resolution: 0.2 Category: Outdoor & Garden
Quick designed stand for drawing and watching on my iPad
* v.2.1 made slot support thicker so it doesn't break anymore, requires a little more force to go together but its much stronger. *v.2 Changed dimension to fit Creditcards and can be used as a wallet Perfect for professionals,…
Modular Hydroponic Tower made for 2inch Net Pod this is the best model as of now and its a world of difference with the other one. the fact that you dont need to spend hundreds of hours more to print the net pods, simply use cheap…
This design was created using Adobe Medium and an Oculus Rift/PC. I have sold it for several years in my Etsy store and assembled/shipped about a dozen of them in that time. The files have been heavily refined for maximum success rate…
This Dewalt Track Saw Adapter Guide allows you to use your 20v 6-½ in cordless saw with the full size tracks! *Use at your own risk* This design prevents the blade guard from recoiling to cover the blade. Also, typical track saws are…
I have an updated version at the following link https://www.printables.com/model/753753-3d-printed-marching-tenors-with-attachements Small tunable drums using standard drum heads and 10-32 x 1-1/2" screws. This was modeled in Fusion 360.…
I got sick of trying to use an adapter so that my Waterbox aquarium return pump would work with ½ inch locline fittings. The original ½ inch adapter that I got from VCA broke, so instead of making a new adapter, I decided to design a…
This is a hitch cover for a 2 inch receiver. The spring allows for easy install and removal to keep debris out of the receiver. I also included the F3D in case you wanted to inlay a custom design.
This is a 2-part Ipad case I designed to fit the 10.2-inch Ipad 7th generation device. I designed this in Fusion 360 and this is my first time using the program. The model is untested but was built using a scale model of the iPad. I…
Ridgid, Erbauer, JCB, AEG, Keter, Magnusson modular pro tool boxes ridgid pro gear case bin lid. Not compatible for use in the clear top organizer. Works best if you take the inner lining out of the lid on the 22inch tool box from system…
A 60mm net cup that I made for a mason jar. Could be used for hydroponics. Can be a substitute for other net cups 4-21-20 Added 3 inch and 2 inch, tested both, they are supportless Print Settings Printer: Ender 3 Pro Rafts: Doesn't Matter…
Created using Zack Freedman's Fusion template: https://a360.co/3ccHbsg Copyright (c) 2023 Zachary Freedman and Voidstar Lab LLC
i tried to eliminate overhangs when doing this but there was just a couple that actually need it mostly under the lid. made in onshape before i learned about printed hinge solutions that are much better. i just might redesign this with…
Halterung um einen 20V / 40V Akku von Worx oder Pattfield am IKEA Skadis System zu befestigen. Es werden zwei der Universal Hooks des hervorragenden Sets von CSD_Salzburg benötigt. Die Universal Hooks sitzen bewusst sehr straff in der…
This collar is based on the AndyMark am-1526 hex collar. This should be used for light-duty applications and prototypes We recommend buying the am-1526 for higher load applications. The collar is to be used on ½" Hex shaft. Use with a ½"…
I created this to connect to standard IBC tote (shultz brand) with a garden hose for watering. Preferable to print garden hose tip down so the inside of the adapter is smooth.
2 variants: for tubes with 14mm outer diameter for tubes with ½ inch (12.7mm) outer diameter Print it in PETG for more flexibility. Optimised for printing without supports to save time and material.
These Gauges are for inside and Outside measuring. The Case for these 29 pieces is available in 0.4mm and 0.8mm wall thickness between the slots, also it looks different. On the Pictures you can see the 0.8mm one. The range is from 1mm to…
Quite accurate model of Milwaukee sawzall blade. However, the real blade has a little bit of curve to it and the teeth are bend out. Will be good help when creating your own custom handles and blade protectors.
Simple drywall grommets for cable management, there are a closed, open and 2 cables (8mm) version. It fit in a 2in hole. Designed for 1/2 drywall Enjoy!
Connect a 1 inch and a 1/2 inch garden hose to an IBC tank outlet. I use it to connect the input from the rain collector and an output without having to drill any extra holes in my IBC or having extra external T-connectors. The angle…
Symmetrical case for WaveShare ESP32-S3 4.2inch RLCD Simple and fast to print case with symmetrical borders around the display. The case allows to access the USB-C port and SD card slot and comes with 3 little button extensions for the…
Two versions are provided: one entire tray, and one split in half to fit on smaller printers. Created using Zack Freedman's Fusion template: https://a360.co/3ccHbsg Copyright (c) 2023 Zachary Freedman and Voidstar Lab LLC
Print 2 of the side and 8 of the roller for one wheel. Mirror the side pieces for vectoring in the opposite direction.
===UPDATE February 7, 2024 Print Profile now available: HERE ===ORIGINAL POST Removed one of the tabs so that it can fit around existing cables. The Extended Tabs version has the bigger tabs for a more secure grip.
This is a 2in Vectored Intake Wheel(mecanum wheel), Features a 1/2in hex bore. Hardware: 2x 3/4in 6-32 bolts 2x 6-32 nylock nuts Printed out of PLA, but has not been tested on a robot.…
This frame is inspired by the driblet frame from rotor riot. It has a functional roll cage arm braces and cam protection. I made this frame to be a light and strong alternative to the driblet, making it a reasonable weight for a micro FPV…
I started with the original single blast gate design from Jok and resized and made some modifications. Then for added the single 4 inch intake port, (or output port depending on how you want to look at it) The 4 inch side will fit a…
Stagemonitor 12inch model scale 1:20
Vaccum hose adapter 1-7/8in to 2-1/2in for shopvac
To print these Panel Filer Plates. I printed them with the face down and used support on the side notches. I've Tried them both out of ABS and PLA and both clicked into place perfectly. This got me passed an OSHA inspection in a pinch and…
I am proud to present you, made from scratch a pot lid stand/drip tray. This accessory can hold your wet and hot pot lids, as well as your kitchen tools. Less mess on your kitchen countertop! Tips: Print both parts separately, then mount…
Gridfinity 3x2 2in Medicine bottle holder for 2 bottles
Note : this is not technically a geodesic dome, but I'm not sure what to call the geometry. Face-centered cubic just doesn't have the same ring to it? Materials PVC Pipe: I bought 10x 10' lengths. PETG: Printed out of 1-3kg (honestly…
Tool tray for mounting around the left front rubber foot of the printer (48mm). Pull the handle to rotate the tray for easy access. Designed to hold all K1/K1C/K1SE tools that came with the printer, INCLUDING the glue stick (and still…
These are fencing blocks and locating pins for use on a 2 inch on Center metal Fabrication table with 16 mm holes. Yes they're made of plastic and they will melt if you try and weld too close to them. But they're certainly a lot cheaper…
12 trees in one cut without the rest
Made for: https://www.harborfreight.com/12-in-drive-metric-impact-socket-set-13-piece-69345.html Model has the sizes as a separate object if you have a multi color printer. You can also remove that object so the print will have the sizes…
Another Net Cup. I didn't like what was out there so I made my own. Prints without support and upright
3.2inch air hockey puck for incase you ever run out of air hockey pucks. Works on nearly any table that accepts 3.2inch pucks. *Dark colors do not work in most air hockey tables, please use bright colored filament Dimensions: 3.2inch x…
I originally made a modified 6 pod section which has integrated mounting tabs but figured a mounting section which attaches to the regular 3 or 6 pod section would be more useful. Uses 4x M5 bolts and nuts to mount.
Simple ring designed to replace the lid of a standard mason jar to hold a 2 inch net pot
The case is designed to hold a Lightning 2 fpv drone with a top mounted battery holder, and room for six 750mah 2s lipo batteries and 8 two blade 2" props. Might also fit other 2" drone frames. Support my work: All of my models are…
just some pvc fittings and a length that can be vertically stretched in a slicer to whatever length that you would need.
This is an excellent projectile for shooting out of a spud gun with a 2 inch diameter. Just like a regular pellet used with pellet guns, this jumbo pellet stabilizes itself in flight and has excellent accuracy when shot from a spud gun.…
A beautiful box with a butterfly drawing for your beloved mother in which you can put her favorite chocolates or other trinkets and give her as a gift. The box can easily turn into a lamp after inserting an LED tealight inside. It will be…
Ask Marci for the midjoints and endjoints. She made a far superior version of the ones I threw together.
I designed this to organize my paper for my new vinyl cutter I got. I uploaded the .step's for easy modification and measurement. You can just adjust the length of the shelf level as you need, its basically a simple extrusion, so it will…
Adapter made for the innovative marine nuvo powerhead outlet. The aquarium outlet is 16mm but should also fit on a .5in outlet. Will need to print on end with supports on the outside. Recommend printing out of PETG for durability.
Im getting better at designing hinges. these ones snap together (PETG) with a bit of part flexing and a careful pinch Dont mind the black and white situation going on with my print. mine printed great with supports just for the tiny hinge…
A quick and dirty cap for 3d printed cap for personal hydroponic system, or anything that is ~1.5in hole(small) or 2in hole(large).
A wall mount for tool holders for 6" - 12" quick change tool post, commonly used with 7"x12" mini lathes. The wall mount supports tool holder with ~43mm wide, ~9.8mm deep, 60 degree dovetails. The quick change tool post is commonly marked…
There wasn't enough clearance in the original model to connect a usb-c cable to charge the phone while on the stand. I fixed this by making the stand much taller. My S22 Ultra sits very nicely on the stand and is very stable, even though…
Arm guards, use M2 x 6mm motor screws. Camera mount, support for flywoo 1s cam/ caddx ant, similar 14mm mounting cameras. Dipole antenna clamp, pigtail power wire clamp.
I printed this out of PLA with 20% infill just to give it a quality tool feeling. It has pockets in the base for magnets if you wanted to have this be mounted to a fab/weld table. Tops are optional but add a nice touch. I have the roloc…
Fully 3D printed frame that I designed for a 2inch fpv drone. I wanted the drone to by fast while still being small and light. The drone weights well under 250g with battery. The frame is inspired by Flywhoo Firefly 2s nano baby 20 . I…
2in1 Pistachio bowl! Stop the mess after eating pistachios with this bowl ! It has a hidden trash can part that can transform into a bowl! This design allows you to print just the top part and use an ikea bowl as the bottom. You can…
This is a set of holders for 2" Velcro backed sanding pads. I have previously made a set of holders for 5" disks here and from requests, made them for a bunch of grits. I used that info to make these with all of the requested grits right…
All my models for ½ in drive. Brands are Icon and Husky. The extensions file and the ratchet will probably work with other brands of extensions.
Most compact hotend and part cooling system for Ender 3 / 3 Pro / 5 / CR-10 and other Creality compatible printers. Weights less than original metal housing, around 40 grams. Designed to reduce unnecessary cooling of heatblock and printed…
I wasnt able to find a buckle for 2inch strapping that I liked. So I remixed 3DMakerNoobs. Its basically the same, split down the middle, widened and extended. I printed in PLA.
Just a quick mod to the 6pod section to mount to a 5 gallon bucket lid using 4x M5 bolts and matching nuts. Printed in petg for better temperature resistance and layer adhesion over pla.
Gridfinity Vise-Grip 300mm-12in Adjustable Wrench Holder 8x2x4
Simple, slightly overbuilt, adapter to go from the inlet on a dust deputy to the small sized shop vac hose that came with my 8gal shop vac (ID ~53mm/2in on the connection). Should work for a the full 2in hose, but you'll probably loose a…
You can find the bracket here !
This is a Display Stand for a 12 Inch (30 cm) Silicon Wafer On my 30x30cm Printing bed i could print in one piece For smaller printers i did make a 2 piece version that needs to be glued together For printing orientation you just need to…
I wanted to use the “2inch Desktop Vise” together with my Magnetic Helping Hand ¹) and the PLA-printed vise simply promised to be too light to have a firm stand. So I added holes to the base, where I could add 8 neodym magnets (two for…
BearQuads TinyBear 2inch drone racing frame TPU parts You can find the frame here: https://armattanproductions.com/pages/product_details/33079 https://www.facebook.com/BearQuads
My mother is a baker and I make all kinds of cookie cutters for her. Here are some Alabama 'A' cookie cutters in two sizes (2inch and 3inch) I modeled. Would be great for fondant and probably also cookies! Be advised, PLA is food safe,…
1/2inch Marble/Steel ball container, suitble for Gravitrax balls. It can hold up to 32 balls.
ENG: Flexi Dog tag with collar in one not for lead . A dog tag can easily get lost, which is why I created a dog tag with a collar in one. length: 44-45cm /17.3-17.7 inches. If interested, I will make other sizes as well Not everyone…
A simple lid to plug empty 2inch Netcup holes in a Hydroponic System to prevent algae growth. Can be printed in any non-transparent material.
This adapter mates a standard 90MM computer fan to 2" schedule 40 PVC. Two designs are included to facilitate both male and female PVC connections.
Remix from Hitch Cover by stimpy 724837 with the Open Source Logo. Made my own from scratch on Fusion360 and I am sharing the files so you can make your own tweeks Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: No…
2" Back Flap Loose Pin Hinge For Theatre - from the original by J. R Clancy of Syracuse NY. Created by me in Fusion 360. Used as a demonstration item for my drafting students. I printed the body halves at 0.1mm and the pin at 0.05mm
'lil adapter that allows to drive the screws without any torque. When I change the tires, there is always 4*5 screws to tighten. Each one with 20 turns. OMG 400 TURNS. :) All done by hand. And after that they are to tighten up to the…
Calibration Tower Height 10-50mm (10mm Steps) Tower mit Stufen in 10mm Schritten zur Calibration der Z Achse Print Settings Printer Brand: Creality Printer: Ender 3 Filament: BASF PLA black Category: 3D Printing Tests
Features magnetic attachment adjustable pitch angle adjustable iPad rotation, with 90deg clicks Additional Material A rod in 32mm diameter. I'm using the core of a depleted plastic wrap 6-32-½ machine screws x 2 4x4x3mm magnets x 89 Super…
The Ricoh Theta Z1 camera has 2 problems, that can be solved using this model: The camera can not stand on its own if you want to use the USB-C port (e.g. for 360-Livestreaming) When using a tripod, the USB-C port is covered by most…
A simple hinged helmet/headset hanger for utvs or anything with overhead tubes. I included the most common sizes 1.25, 1.5, 1.75 and 2in. I also included the fusion file if you need something different, just update the tube diameter…
AEG 2in1 Ergorapido Universal Adapter since a lot of models are available for a round connector
if you are looking for a simple and quick to print wall for your board games, this model is the one! They measure is 2 inches long and 1 inch high. and it has the clips to easily attach them together Thank you for your support! follow me…
From an old HP/Compaq computer, I rescued a card-reader normally mounted in a 2.5" drive bay. I designed a case for it that uses the original screws to hold it in. The back is completely closed and the cable, which has a 2x5 JTAG Header…
I made 3 different-sized caps for these sized pipes: 1/2in, 3/4in, and 1in They fit onto the pipes really well and are decently tight, but these are not waterproof unless you use PVC pipe glue. Very strong and doesn't cost much filament…
Printed at 75mm/s (infill speed) and 50mm/s (wall speed) 215 extruder 60 bed 0.3 mm with 0.4mm nozzle
11/26/2020 Update: V3!! (Green) Fixed part that was touching M5 screws, Added mounting point for 40mm fan As i accidentally destroyed my Geeetech A20m hotend trying to unclogged it. So i'm designing a mount / backplate for the Bigtreetech…
These models are to lift KATO NSCALE VIADUCT SHOPS For window and the front entry I used the following: 10 Pack 12x12x.02” Clear Plastic Sheet, Plexiglass Craft Plastic Sheets PET Flexible Lightweight Clear Plastic Sheets for DIY Craft…
This jig is designed to give a perfect fit for the Everbilt 3-1/2in w 1/4in Radius Hinge. The jig works with the Porter Cable Router Template Guide 42054 (¼in I.D. and 5/16in O.D.) and Whiteside RU1800 Standard Spiral Upcut Bit 3/16in…
PVC Picatinny Quad Rail Picatinny quad rail used for mounting accessories to a PVC pipe. Modifying the parametric FreeCAD model FreeCAD model is parametric, meaning it is designed to easily modify the parameters to your liking. If you…
Created using Zack Freedman's Fusion template: https://a360.co/3ccHbsg Copyright (c) 2023 Zachary Freedman and Voidstar Lab LLC
Inspired by TheSameNameTwice's organizer cups for the 11in Parts Organizer ( link ), I made a set a little bigger for the 12in container. I bought a Husky 12in Small Parts Container, but wanted to store all of my tiny screws in it, so I…
A mount for Milwaukee M12 CIW12 1/2in Impact Wrench based around a 3d scan. uses 2 screws for mounting.
Simple adapter to fit an 40mm fan in a standard 2in schedule 40 PVC pipe. Category: Electronics
I needed a way to protect outdoor vents from things getting inserted, I was worried about kids bouncy balls or a water hose, but perhaps more practically this protects from mice or tree berries. After purchasing some stainless steel…
This is an Mount and FanDuct for the Phaetus TaiChi “2in1out" Hotend and it utilizes 2x 5015 fans with direct drive capability. It is designed to be used with either an single Bondtech LGX Lite extruder for the primary filament and an…
Adapter to mount cameras w/ EF-M (EOS M50 in this case) bodies to telescopes that use 2" focusers for prime focus astrophotography. I know “proper” products exist from telescope suppliers, but what fun would that be. I didn't need…
Original model and build instructions here: https://marcosatm.com/2020/06/04/2in-crayford-focuser/ This is based on the nut version as I found the heatserts for the bearings difficult to get right. I've added a lug to secure the reduction…
