2in1 Mount for Worx / Pattfield 20V battery for IKEA Skadis System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2in1 Mount for Worx / Pattfield 20V battery for IKEA Skadis System
- Ocena
- 3,429 / 5
- Polubienia
- 34
- Pobrania
- 290
- Wydruki
- 7
- Wyświetlenia
- 1614
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Halterung um einen 20V / 40V Akku von Worx oder Pattfield am IKEA Skadis System zu befestigen. Es werden zwei der Universal Hooks des hervorragenden Sets von CSD_Salzburg benötigt.
Die Universal Hooks sitzen bewusst sehr straff in der Halterung, sodass die Befestigung stabil ist.
Die Halterung kann auf zwei Arten verwendet werden:
- Akku wird von oben eingesteckt: Hier rastet der Verschluss nicht ein, der Akku kann ohne den Entriegelungsknopf zu drücken, nach oben entnommen werden
- Akku wird von unten eingesteckt: Hier rastet die Verriegelung ein, sodass der Akku nicht nach unten herausfällt. Zur Entnahme muss der Entriegelungsknopf am Akku gedrückt werden
ACHTUNG: Es scheint so, als ob es verschiede Typen von Worx Akkus gibt. Der Akku vom Typ WA3575 20V 2.0 Ah passt wohl nicht.
Bracket to attach a 20V / 40V battery from Worx or Pattfield to the IKEA Skadis system. Two of the Universal Hooks from the excellent set by CSD_Salzburg are required.
The Universal Hooks deliberately sit very tightly in the holder so that the attachment is stable.
The mount can be used in two ways:
- The battery is inserted from above: The lock does not engage here, the battery can be removed from the top without pressing the release button
- The battery is inserted from below: The lock engages here so that the battery does not fall out. The release button on the battery must be pressed to remove it
IMPORTANT: It seems that there are different types of battery from Worx. Type WA3575 20V 2.0 Ah does not fit.