2in1 Mount for Worx / Pattfield 20V battery for IKEA Skadis System
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
2in1 Mount for Worx / Pattfield 20V battery for IKEA Skadis System
- Rating
- 3.429 / 5
- Likes
- 34
- Downloads
- 288
- Makes
- 7
- Views
- 1,608
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
Halterung um einen 20V / 40V Akku von Worx oder Pattfield am IKEA Skadis System zu befestigen. Es werden zwei der Universal Hooks des hervorragenden Sets von CSD_Salzburg benötigt.
Die Universal Hooks sitzen bewusst sehr straff in der Halterung, sodass die Befestigung stabil ist.
Die Halterung kann auf zwei Arten verwendet werden:
- Akku wird von oben eingesteckt: Hier rastet der Verschluss nicht ein, der Akku kann ohne den Entriegelungsknopf zu drücken, nach oben entnommen werden
- Akku wird von unten eingesteckt: Hier rastet die Verriegelung ein, sodass der Akku nicht nach unten herausfällt. Zur Entnahme muss der Entriegelungsknopf am Akku gedrückt werden
ACHTUNG: Es scheint so, als ob es verschiede Typen von Worx Akkus gibt. Der Akku vom Typ WA3575 20V 2.0 Ah passt wohl nicht.
Bracket to attach a 20V / 40V battery from Worx or Pattfield to the IKEA Skadis system. Two of the Universal Hooks from the excellent set by CSD_Salzburg are required.
The Universal Hooks deliberately sit very tightly in the holder so that the attachment is stable.
The mount can be used in two ways:
- The battery is inserted from above: The lock does not engage here, the battery can be removed from the top without pressing the release button
- The battery is inserted from below: The lock engages here so that the battery does not fall out. The release button on the battery must be pressed to remove it
IMPORTANT: It seems that there are different types of battery from Worx. Type WA3575 20V 2.0 Ah does not fit.