Dog hole jig remix | Parametric | Fusion360
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reinforced dog hole jig
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 136
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A remixed bench dog jig by Gaudibursch74.
The Fusion360 file has many changeable parameters.
The jig is more rigid than the original with the same hole dimensions and locations.
Added a drill guide for the ring. I used it to drill a 4mm hole and then enlarge it with 10mm drill bit, so there would be less material for the router to remove.
Added support blocks that are the same height as the jig for helping support the router base when cutting the holes near the perimeter of the jig.
Added a insert-able "template ring" to be used with a flush trim router (as shown below).
Resize the ring for your dog hole size. Print them and drill some test holes with them. Resize the ring to fit inside the jig with enough friction to not come out the jig when using the router. Print more rings than you need as every ring will have different tolerances and even the jig wont have the exact same holes. You may, for example, print 4 exact rings in one go, but only 1 might be too loose inside the jig or be the only one to fit perfectly. Same thing with the inside hole diameter of the ring - one might drill a perfect fitting hole, others not, even though they all should be printed the same.