Liczymy pasujące modele…
NO, THERE IS NO WAY TO GET A LICENSE TO SELL THE BOX COMMERCIALLY. MY DESIGNS WILL ALWAYS BE FREE FOR NON-COMMERCIAL USE ONLY. PLEASE STOP ASKING! The design is based on the " Tool box parametric " by Yanev and provides some more options…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
IMPORTANT Read the description carefully before print! Check the changelog at the bottom before printing, there might be updates to the model The original model and the parametric one are not stackable with each other! Prusa Mini version:…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
V2 : increase of the mecanical play of the axis to avoid that the two parts are welded during printing. Improved closure. Just change the dimension in fusion 360 to resize it.
Wydruk około 0,42 €–0,51 € nettoWstępna wycena jednego wariantu
Print orientation: flat
Wydruk około 0,24 €–0,30 € nettoWstępna wycena jednego wariantu
I saw a few models on here for printable SKADIS pegboard and I love the idea. However, many of the models were dimensioned wrong for my printer or intended purpose. I decided to make a simple to edit, parametric file for generating…
Wydruk około 14,37 €–17,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Tested in PETG, recommended to print in PETG
Wydruk około 0,52 €–0,63 € nettoWstępna wycena jednego wariantu
Extra strong wall hook collection - 6 variations + STEP file
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
Inspiration: https://makerworld.com/en/models/815908-over-door-hook-wall-shower-hook-many-thickness#profileId-767349
Wydruk około 1,17 €–1,43 € nettoWstępna wycena jednego wariantu
5 different sizes M3 corner mount brackets. Customize to your liking using the STEP file. suggestions are also possible
Wydruk około 0,35 €–0,42 € nettoWstępna wycena jednego wariantu
Update: Extra hole for screw mounting ( d = 3 mm )
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
If the bearings are stuck, try using a small flathead screwdriver to free the balls. Occasionally, the tight tolerances can cause the small components to stick together. Happy Printing :)
Wydruk około 0,37 €–0,46 € nettoWstępna wycena jednego wariantu
This is a marking-gauge for woodworking purposes to mark the same measurements against different edges. I found some existing marking-gauges around but wasn't able to adapt them to my ruler measurements. So I decided to make my own in…
Wydruk około 0,62 €–0,76 € nettoWstępna wycena jednego wariantu
Electric Cable mounts, mounted using screws D=3mm or double sided tape. Parametric using the STEP file :)
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
MTG Commander Deck Box 100+ sleeved cards. Default inner dimensions are: width 70, depth 65, height 93 mm but all can be adjusted. Parametrized Fusion360 file for easy adjustment included. MTG deck box for 100+ sleeved cards. Heavily…
Wydruk około 7,18 €–8,77 € nettoWstępna wycena jednego wariantu
Unstable fusion360 source file It seems like a recent F360 update broke the model file. Since it is not the first time, I'm in the process of ditching Fusion360 from my workflow altogether. I'm learning FreeCAD and will attempt a redesign…
Wydruk około 1,51 €–1,85 € nettoWstępna wycena jednego wariantu
Print the model in spiral vase mode. Parameters batteryD = 14.7; // battery diameter height = 16; baseHeight = 0.8; wallThickness = 0.4; // nozzle size space = 2; columns = 5; lines = 3;
Wydruk około 0,55 €–0,67 € nettoWstępna wycena jednego wariantu
Introduction Inspired by "Cable Corners... keep cables in corners!" by muzz64 on Thingiverse Fusion 360 parametric design This is for bend-sensitive cables, such as Cat 6 and Cat 6A. In the case of these cables, the curvature of the bend…
Wydruk około 0,72 €–0,88 € nettoWstępna wycena jednego wariantu
This design was inspired in 2 other designs in this site: https://www.thingiverse.com/thing:2339441 https://www.thingiverse.com/thing:2668159 Since I could not find for the original file to adapt it to my battery with protection circuit…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
Did you lose/break the lace lock on your shoes, coat, sweatpants, hoodie, or camping gear? Did they not come with one to begin with? Say goodbye to self-untying shoes and slowly descending sweatpants with this 100% 3D printed gadget.…
Wydruk około 0,15 €–0,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A modern approach to the wavy style plant pots with the use of parametric settings. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a…
Wydruk około 3,72 €–4,55 € nettoWstępna wycena jednego wariantu
Electric Cable Diameter 5mm -> 10mm, mounted using screws D=3mm. Parametric using the STEP file :)
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
Tested with PETG Print Use a M3/M5 bolt to create the threads Mount to the 4040/2020 extrusion
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
A parametric car/motorcycle license plate key chain designed to be printed on single filament printers with color change. Add a filament change in your slicer and swap the filament mid print in order to achieve a two color print. Features…
Wydruk około 0,09 €–0,12 € nettoWstępna wycena jednego wariantu
[DESCRIPTION] This model is a battery adapter : from battery parkside x20 team sold by Lidl to any Makita tool using 18v battery. It is an remake from Myle's work (see : thingiverse.com/thing:3110392 ). Thickness differs from original…
Wydruk około 2,44 €–2,98 € nettoWstępna wycena jednego wariantu
A standard and dual screwgate locking carabiner, using a print-in-place pivot mechanism, and available in multiple sizes . The STLs for three different sizes of each style are included here for convenient printing. This model is fully…
Wydruk około 0,82 €–1,00 € nettoWstępna wycena jednego wariantu
After seeing @i6o6 “Simplest cable organizer” , I feel in love with the idea of a dead simple cable organization system but ended up wondering if I could make a similar model that would be suitable to be printed extremely quickly using a…
Wydruk około 0,83 €–1,01 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Parametric glue spreader. No need to go to the shop. The print files all have teeth glue lines 1,5 - 2,5 - 3,5 mm. The shape of the glue line is triangular. The FreeCad file is included so you can modify this trowel exactly to your needs.…
Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu
Perfect for making a rack for your clothes or fillament roles Further scalable in the slicer
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
This is my take on printed anchors. I designed them for use with XPS foam from which I made an enclosure for my 3D printer. In combination with wood screws an washers they can be used to hold together foam boards or mount things like…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Some not required material (in my opinion) was removed to decrease printing costs and duration further. Main features: Two magnets for each segment with press fit (6x2mm). Minimized material costs, the gridfinity boxes are fixed only by…
Wydruk około 0,54 €–0,66 € nettoWstępna wycena jednego wariantu
these easy to print and small laptop stand. ensure ventilation while gaming or rendering etc.. have fun world Print instructions these easy to print and small laptop stand. ensure ventilation while gaming or rendering etc.. i added my…
Wydruk około 3,05 €–3,73 € nettoWstępna wycena jednego wariantu
Update 07/06/2026 FreeCAD redesign is done! Testing is on its way. There will be many new parameters for more control; the model will be more resilient to changes; more sizes will be available; A new derivative design will exist (one that…
Wydruk około 3,43 €–4,19 € nettoWstępna wycena jednego wariantu
Update 25.03.2024: Added a parametric and customizable version of the stand. Improvements The model was developed to enable fast and material-saving printing and at the same time to be stable. The print in size 25mm requires only 42g of…
Wydruk około 1,74 €–2,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
UPDATED 2022-10-14: Many improvements, detailed at the end. TL;DR: New features, more spool models, improvements in printability, adapted to Recymbol 1.1. We all know that spools spin faster at the end, and slower when they're the fullest…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
I wanted to try my hand at generating an oloid using OpenSCAD that is easy to print. So after generating it, I split it into two parts that can be perfectly aligned for gluing using two pins that are made from small pieces of 1.75mm…
Wydruk około 1,04 €–1,28 € nettoWstępna wycena jednego wariantu
I created this parametric OpenSCAD drilling template to help me mount an inset door into a cabinet using some Blum inset hinges. Adjust the “inset” variable in the OpenSCAD code to suite the thickness of your door. I've provided STL and…
Wydruk około 0,81 €–0,99 € nettoWstępna wycena jednego wariantu
Details: Available for glass panes with the thickness of 6mm, 8mm, 10mm, 1/4", 3/8" and 1/2". All models available as STL and STEP file. All models have a 0.1mm extra tolerance in the thickness. Print flat for maximum strength. No…
Wydruk około 1,00 €–1,22 € nettoWstępna wycena jednego wariantu
This is a parametric planter with a vented, self-watering reservoir and water level indicator. I designed this in Fusion 360 and have included STLs for a 4", cylindrical version with interchangeable smooth, fluted, and knurled variants in…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
A useful and stackable tray used for sorting, organizing, or many other uses. Dimensions of standard size are 125mm x 125mm x 15mm (lip not included)
Wydruk około 1,81 €–2,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple burger patty press designed to be strong enough so you can really pack your patty tight. The bottom is removable so your burger just pops out. Waxed paper separator discs in a variety of sizes are readily available on Amazon.…
Wydruk około 7,72 €–9,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a parametric model for detergent brands that lie on their side and dispense out of a spout. The model clips onto the spout and provides a tray to catch drips and store the detergent cup. See the comments in the OpenSCAD file for…
Wydruk około 2,57 €–3,14 € nettoWstępna wycena jednego wariantu
This is my take on a segmented vaccum hose. It is parametric and can be adjusted within quite a range with very basic FreeCAD knowledge. The 3mf and gcode files here are for a segmented hose with approx. 40mm inner diameter. The inlet…
Wydruk około 0,66 €–0,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This cable organizer prints-in-place and is fully parametric (fusion .f3d file included) Adjustable parameters include: inner-width/height, clamp width, thickness, tolerance and more.
Wydruk około 0,51 €–0,63 € nettoWstępna wycena jednego wariantu
Note: there is also robust heavy duty vertically printed mode: https://www.printables.com/model/337795-parametric-hinge-vertically-printed-robust Info: i have remodelled and made a great model from @Meistel Edel (thx!) parametric , so any…
Wydruk około 0,72 €–0,88 € nettoWstępna wycena jednego wariantu
A new parametric model inspired by the structure of big rock formations. Used Filament: This model was printed using Gunmetal Matt PLA from FormFutura The FormFutura team was so nice to send us some samples and we had the pleasure to…
Wydruk około 2,64 €–3,23 € nettoWstępna wycena jednego wariantu
This is just a very simple sliding lid box that can be used to store things like game bits and keep them safe. The F3D file includes adjustable parameters for Height, Width, Length, Thickness and Clearance . If you would like a different…
Wydruk około 2,83 €–3,46 € nettoWstępna wycena jednego wariantu
UPD v23: Fixed wall thinkness issue on top cover UPD v25: Fixed fillet fails to calculate for small “holes"; Fixed top/bot X axis pattern for large boxes (>50mm width) UPD v26: Fixed side wall holes number and offset calculation, now…
Wydruk około 2,56 €–3,13 € nettoWstępna wycena jednego wariantu
Hi, This is a printable replacement wheel for pretty much anything that needs one. It’s designed to be fast to print while still being stable and durable . I originally made it as a replacement wheel for my lawnmower —then a neighbor…
Wydruk około 14,40 €–17,60 € nettoWstępna wycena jednego wariantu
Based off Zack Freedman's pretty useful Gridfinity stoarge system. Original model I used can be found here: https://myhub.autodesk360.com/ue2b114c8/g/shares/SH35dfcQT936092f0e43a9d5084dee87f7ba More info on Gridfinity can be found here: I…
Wydruk około 5,10 €–6,24 € nettoWstępna wycena jednego wariantu
This remix thickens the loop to reduce the change of breakage via wear and tear.
Wydruk około 0,12 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Overview This customizable, parametric FreeCAD model features a simple box with a sliding lid that clicks into place. Features Fully parametric design Easy-to-print design without the need for supports Snap-fit sliding lid mechanism Ideal…
Wydruk około 1,06 €–1,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Updated 2023-12-07 (see below) There are several designs for bearings (roller, ball and sliding) designs already in the internet. Some are customisable. I did not find one that I could tune to be accurately sizeable and printable.…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
Motivation The xTool RA2 rotary is a great accessory, but it can be challenging to square the workpiece up to the RA2 rotation axis. Solution Design and print a fence to achieve the following objectives: Allow workpiece to be held square…
Wydruk około 1,77 €–2,16 € nettoWstępna wycena jednego wariantu
Info: remodelled and made a great model from @Meistel Edel (thx!) parametric , so any size can be easily created any width/height any number of holes the plate is 3.2mm thick Variations: exported few most common variations for convenient…
Wydruk około 0,83 €–1,01 € nettoWstępna wycena jednego wariantu
Magnetized dust collection couplings are not my original idea, but I was tired of searching for a model that fit the many unusually sized dust-ports in my shop, so I made this one parametric. Assembly involves gluing your magnets into the…
Wydruk około 12,98 €–15,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
To edit the text in PrusaSlicer (you must be in Expert Mode ): Switch to 3D editor view Right click on the text to be changed. Select “Edit text”. Edit the text. Slice! For multi-color, add tool changes or filament changes at the desired…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
Customizable Parameters: Tooth Profile (GT2, HTD 3M, HTD 5M) Tooth Count Tooth Width (Belt Width) Bore Size Snap-Ring Size Grub Screw Size What you need to know: Printed in two parts. A metric snap ring/retaining ring (DIN 471) is…
Wydruk około 0,51 €–0,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
edit: now the parametric file is included! read instructions at the bottom to learn how to use it After the original bracket in my Ikea wardrobe broke I made a stronger replacement. It's also more convenient to use, because the rail can…
Wydruk około 1,35 €–1,65 € nettoWstępna wycena jednego wariantu
Motivation I have a Laser Cutter and AC Infinity 6” Inline Duct Fan requiring an adapter to reduce the 6” fan inlet to the 4” ducting from the laser. Initially, I purchased the AC Infinity Duct Adapter, 6” to 4” Ducting Reducer , but as…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted to make my own print-in-place 608 ball bearing for my Ikea Samla Drybox so that all the necessary parts can be printed down to the IkeaBox. I modeled it in Fusion360 and so I can offer it to you as an .f3d file so you can easily…
Wydruk około 0,46 €–0,56 € nettoWstępna wycena jednego wariantu
Sometimes, you want to drill into a wall and you don't really want debris flying everywhere, so, I made this parametric shop-vac attachment. Works flawlessly! Pretty simple, sits flat against the wall and has a "window" that allows you to…
Wydruk około 7,40 €–9,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A 3d printed scaper's tool is a handy device for aquascaping enthusiasts who want to create and maintain beautiful underwater landscapes in their aquariums. It also works great as a scraper. The design of the scaper's tool is parametric,…
Wydruk około 0,56 €–0,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Case to GL iNet Slate 7 router. You will need six M3x30 screws to assemble it.
Wydruk około 0,39 €–0,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Este es un juego de ajedrez completo para impresión 3D , diseñado desde cero en FreeCAD con un enfoque paramétrico , limpio y funcional. El proyecto incluye los archivos fuente originales de FreeCAD , lo que permite modificar fácilmente…
Wydruk około 0,75 €–0,92 € nettoWstępna wycena jednego wariantu
This is a remix of figterk 's model to be able to use any rigid filament for those who don't have any flexible ones. I used the Gridfinity compatible model from DSwanlund for the dimensions. The bit holder fits right into the case, but…
Wydruk około 3,34 €–4,09 € nettoWstępna wycena jednego wariantu
I have made updated model with lid and viewing ports, check it out: New version I present to you fully parametric boxy things dispenser - originally meant for dishwasher tablets. You can use it of course for anything with boxy shape.…
Wydruk około 3,21 €–3,92 € nettoWstępna wycena jednego wariantu
Manufacturing procedure: Material: PETG 3D Printer: FDM 3D printer, average print time 2 – 6 hours, depending on size Slicer settings: 7 perimeters, 0.3mm layer height, print vertically, use brim Post processing instructions: Clean the…
Wydruk około 3,73 €–4,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Tired of tangled measuring tapes? This winder fixes it once and for all — and it does it ridiculously smoothly . 🎯 WHY YOU’LL LOVE IT 🌀 One-finger rewind Thanks to the 608 bearing, it spins with almost zero resistance. 🧠 Smart flexible…
Wydruk około 1,46 €–1,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This soap dish is a classic. You can change some parameters directly in Fusion360. The F3D file is included. You can (and probably should) print the two parts with contrasting color for a better look. Related work I've also published a…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
Features Holds 56 standard bits + 9 Long ones (my kit has 52+4, so there are slots to spare) Holds the magnetizer/demagnetizer thingy Has a small pocket for carrying miscellaneous items, plus 7 more slots in the lid, where you can put…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
This Ikea Skadis pegaboard accessory comes in beautiful honeycomb pattern and can hold many things, like cables, scissors, precision pliers and probably many more. It is part of my honycomb skadis collection. It has a hex shaped pin to…
Wydruk około 0,38 €–0,46 € nettoWstępna wycena jednego wariantu
Vice jaw protectors - Grip Magnets: 5x3 STEP files included to make adjustments
Wydruk około 3,45 €–4,22 € nettoWstępna wycena jednego wariantu
Wanted to try cutting hair with the oneblade and couldn't find any extension/guard long enough, so I parametrized this model from RemyEnder ( https://www.printables.com/cs/model/192614-oneblade-philips-sabot ). This model has only one…
Wydruk około 1,46 €–1,78 € nettoWstępna wycena jednego wariantu
The "Parametric Magnetic Hinged Box" is a 3D model made with FreeCAD. Designed with different needs in mind, it offers a hinged lid and magnetic fasteners for a secure close. It's versatile and perfect for multiple uses, like lunch boxes,…
Wydruk około 0,62 €–0,76 € nettoWstępna wycena jednego wariantu
A waffle structure bowl! Easy to assemble and looks great in any place - can store decorative balls or fruits - depends on your liking. Print information: Recommended using a lower layer hight (0.15/0.2mm) and a smaller nozzle (0.4/0.3mm)…
Wydruk około 0,40 €–0,48 € nettoWstępna wycena jednego wariantu
Add a touch of passion to your home or office with this Prusa logo wall art! This creation has been carefully designed. It's the perfect accessory for 3D printing enthusiasts, technology aficionados, or anyone fascinated by the beauty of…
Wydruk około 10,85 €–13,26 € nettoWstępna wycena jednego wariantu
A handy little clip/holder that is small enough to leave on a compact EDC flashlight, but is there for when you need hands-free light. The design is fully parametric so you can customise to fit your combination of spectacle frame and…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Parameterized lube station for your mechanical keyboard switches or a simple switch display plate if you choose the cutout size to exactly fit Cherry style switches (14x14mm). How to print Orientation: Face down (no supports) Perimeters:…
Wydruk około 1,45 €–1,77 € nettoWstępna wycena jednego wariantu
Design can be modified inside OnShape completely by using Variables. Link to OnShape…
Wydruk około 3,69 €–4,51 € nettoWstępna wycena jednego wariantu
I loved the idea behind cmsj's 45-degree AirPods Pro holder, but I wanted to print a model that was a bit more precise. I pulled dimensions from Xials' extremely precise CAD model of the device to make a custom-fit version using…
Wydruk około 0,74 €–0,90 € nettoWstępna wycena jednego wariantu
I've been learning FreeCad by designing my own accessories for RastaP's Honeycomb Storage Wall . This Solder Spool Holder is my first fully parametric design. The FreeCad file has a spreadsheet in it with all of the parameters. The ones…
Wydruk około 2,51 €–3,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a simple openscad model of a washer for any screw size you need. Simply modify the dimensions to your needs. The cost of printing is close to zero and the time to warm-up is most likely the longest part. The worth of being the…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
Title: Drill Mountable Yarn Winding Cones (Parametric) Designer: DaniAngel License: Drill Mountable Yarn Winding Cones (Parametric) © 2023 by DaniAngel is licensed under CC BY-NC-SA 4.0 Summary: This project is a parametric design of yarn…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Open .scad file (you must install first OpenSCAD freeware software) If you need, change phone_thick variable if your phone is thicker of thinner. Also you can change angle variable if you want your phone more or less inclined. Set…
Wydruk około 0,27 €–0,33 € nettoWstępna wycena jednego wariantu
The bracket in SLA file has some arbitrary dimensions I have used for one of the power bricks I wanted to mount from the bottom of my desk. Mounting is done using self-tapping screw. Adjust dimensions according to the size of your own in…
Wydruk około 1,13 €–1,38 € nettoWstępna wycena jednego wariantu
The gcode fits for HEUER FRONT 140 with replaceable jaws. With the FreeCAD file (.FCStd) you can easy customize the protective jaws for many other vices. In particular, round or oval workpieces can be securely clamped and worked.
Wydruk około 4,99 €–6,10 € nettoWstępna wycena jednego wariantu
I wanted to design something slightly more compact and easier to use than my original travel case with integrated stand. In the end: it's slightly more compact there is a version of the stand in which you can insert a 1€ coin to add…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A Tiny Temperature Tower A small temperature tower you can tune to your liking, using OpenSCAD's customizer. I've included gcode for the Mk4 with input shaping. If you'd like me to provide a specific configuration of temperature range and…
Wydruk około 0,26 €–0,31 € nettoWstępna wycena jednego wariantu
Coupler for keeping CPAP hose together so it doesn't come unhooked in the night. Also likely good for extension cords or any other connections in need of reinforcement. Separate variables for: Internal length Overall internal diameter…
Wydruk około 1,53 €–1,87 € nettoWstępna wycena jednego wariantu
Simple storage for zipties or anything else long and skinny. There are other ziptie holders available but none that included design files. The OpenSCAD file has customizable values for: Number of compartments Height of each compartment…
Wydruk około 8,48 €–10,36 € nettoWstępna wycena jednego wariantu
Add a touch of passion to your home or office with this BambuLab logo wall art! This creation has been carefully designed. It's the perfect accessory for 3D printing enthusiasts, technology aficionados, or anyone fascinated by the beauty…
Wydruk około 2,37 €–2,90 € nettoWstępna wycena jednego wariantu
It's a fully functional cylinder lock that offers 5⁴ (=625) different combinations. You will need 4 springs from a ball pen (diameter = 4 mm, Length > 19 mm, tolerance is quite high and parametric) or let gravity do the its job for a…
Wydruk około 3,91 €–4,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Každý potřebuje trochu jiné rozměry své krabičky… proto vznikl tento model. Nastavitelné parametry umožnují přizpůsobení modelu. Update: v1.1 - Přidán vnitřní pořadač (Add inside binder) Koukněte i na mé další modely .
Wydruk około 1,11 €–1,36 € nettoWstępna wycena jednego wariantu
Knitting Machine Buckle for Circular Knitting Machines By: Dani_Angel License: Knitting Machine Buckle © 2023 by Dani_Angel is licensed under Attribution-NonCommercial-ShareAlike 4.0 International Description: This work was created with…
Wydruk około 3,13 €–3,82 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Seems like everyone is re-inventing the wheel. Here is mine. As some people want to get money for the STL files which are quite easy to create without any magic and I do not want to spend my money, here are my designs (from scratch) of…
Wydruk około 1,70 €–2,07 € nettoWstępna wycena jednego wariantu
This watering can attachment makes it possible to water with pinpoint accuracy even with large watering cans (10 L).
Wydruk około 0,57 €–0,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Adhesive nails compatible with tesa refill strips in various sizes. I print mine in 0.1mm layer height to get a nicer definition on the plate and hook. The model is parametric for use in openSCAD with clear parameters for changing various…
Wydruk około 0,26 €–0,31 € nettoWstępna wycena jednego wariantu
Get your bathroom cabinet organized with these parametric shelves! Ideal to optimize small cabinets where vertical space is not well utilized. Included you'll find 4 predefined sizes: small (15x5x8cm) large (20x8x12cm) large with tall…
Wydruk około 7,30 €–8,93 € nettoWstępna wycena jednego wariantu
The cover image shows names of parameters you can edit in Fusion. Like this:
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
A rugged parametric box for spare fuses for your car/motorcycle/caravan. It holds 19 fuses. You will need 3 М3х40 bolts and 6 M3 nuts for the hinges. Print settings: Print in PETG the box and the seal in FLEX material; 0.2 Structural…
Wydruk około 0,27 €–0,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
