1 / 6
Parametric hinge (vertically printed)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stable (tight) hinge with any length/width and count of holes - defined by few params.
- Ocena
- 5 / 5
- Polubienia
- 238
- Pobrania
- 1250
- Wydruki
- 4
- Wyświetlenia
- 3547
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — NoDerivatives
SzczegółyPliki (18)Wydruki i komentarze (Wydruki: 4) (Komentarze: 6)Remiksy (0)Kolekcje (399)Powiązane
Note:
- there is also robust heavy duty vertically printed mode: https://www.printables.com/model/337795-parametric-hinge-vertically-printed-robust
Info:
- i have remodelled and made a great model from @Meistel Edel (thx!) parametric, so any size can be easily created
- any width/height
- any number of holes
- the plate is 3mm thick
Variations:
- exported few most common variations for convenient usage
- see Blender file for other params
Print info:
- 4 perimeters - so almost whole body is made of perimeters
- brim
- it is not needed for low hinges, but to be sure, add brim
- 50% infill (there is not much of it with 4 perimeters)
Assembly:
- ❗❕ on 1st look it may look like impossible to bend, but try to bend it slowly on one side and back, repeatidly and after a while it should work nicely.
Parametric design:
- connectors_count
- the height of hinge
- number of connectors on the right side of the hinge
- height in cm is always connectors_count-0.5 (so for 5connectors, it will be height 4.5)
- side_width
- width of one side of the hinge in cm
- holes_x
- number of holes in the width direction
- holes_y
- number of holes in the height direction
