1 / 6
Parametric hinge (vertically printed)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stable (tight) hinge with any length/width and count of holes - defined by few params.
- Rating
- 5 / 5
- Likes
- 238
- Downloads
- 1,250
- Makes
- 4
- Views
- 3,547
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — NoDerivatives
Note:
- there is also robust heavy duty vertically printed mode: https://www.printables.com/model/337795-parametric-hinge-vertically-printed-robust
Info:
- i have remodelled and made a great model from @Meistel Edel (thx!) parametric, so any size can be easily created
- any width/height
- any number of holes
- the plate is 3mm thick
Variations:
- exported few most common variations for convenient usage
- see Blender file for other params
Print info:
- 4 perimeters - so almost whole body is made of perimeters
- brim
- it is not needed for low hinges, but to be sure, add brim
- 50% infill (there is not much of it with 4 perimeters)
Assembly:
- ❗❕ on 1st look it may look like impossible to bend, but try to bend it slowly on one side and back, repeatidly and after a while it should work nicely.
Parametric design:
- connectors_count
- the height of hinge
- number of connectors on the right side of the hinge
- height in cm is always connectors_count-0.5 (so for 5connectors, it will be height 4.5)
- side_width
- width of one side of the hinge in cm
- holes_x
- number of holes in the width direction
- holes_y
- number of holes in the height direction
