Yet another fully parametric silica box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fusion360 source files included. Fully parametric silica box where you may change anything you like (including pattern)
- Ocena
- 4,913 / 5
- Polubienia
- 148
- Pobrania
- 1107
- Wydruki
- 24
- Wyświetlenia
- 3296
- Oceny
- 23
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
UPD v23: Fixed wall thinkness issue on top cover
UPD v25: Fixed fillet fails to calculate for small “holes"; Fixed top/bot X axis pattern for large boxes (>50mm width)
UPD v26: Fixed side wall holes number and offset calculation, now properly centered and don't go outside wall bounds
Yet another fully parametric silica gel container, built as a learning project.
Designed to be placed in a dry-box setup (you may see it in 1 of pictures).
50mm x 100mm box that's clicks on and off effortlessly, yet holds together.
Fusion360 source file included for your convenience to change anything you like.
Any suggestions, improvements or comments appreciated.
Includes a lot of parameters and build in a way that changing one should re-render box without any efforts required from your side.
Separate parameters for wall holes pattern and “top/bot” (flat_pattern) allow to customize it to fit your silica gel size and printer capabilities and to fit your own dry-box setup :)
Tips:
- Printed without supports
- If your printer strugles with bed adhesion (printing on glass etc), other than applying glue I may advice to increase
“flat_pattern_x_spacing” and “flat_pattern_y_spacing” to a value of 3mm+ since there is a lot of retraction happening on first layers when sliced with 0.4mm nozzle OR/AND decrease print speed for the first layer