Yet another fully parametric silica box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fusion360 source files included. Fully parametric silica box where you may change anything you like (including pattern)
- Rating
- 4.913 / 5
- Likes
- 148
- Downloads
- 1,107
- Makes
- 24
- Views
- 3,296
- Reviews
- 23
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
UPD v23: Fixed wall thinkness issue on top cover
UPD v25: Fixed fillet fails to calculate for small “holes"; Fixed top/bot X axis pattern for large boxes (>50mm width)
UPD v26: Fixed side wall holes number and offset calculation, now properly centered and don't go outside wall bounds
Yet another fully parametric silica gel container, built as a learning project.
Designed to be placed in a dry-box setup (you may see it in 1 of pictures).
50mm x 100mm box that's clicks on and off effortlessly, yet holds together.
Fusion360 source file included for your convenience to change anything you like.
Any suggestions, improvements or comments appreciated.
Includes a lot of parameters and build in a way that changing one should re-render box without any efforts required from your side.
Separate parameters for wall holes pattern and “top/bot” (flat_pattern) allow to customize it to fit your silica gel size and printer capabilities and to fit your own dry-box setup :)
Tips:
- Printed without supports
- If your printer strugles with bed adhesion (printing on glass etc), other than applying glue I may advice to increase
“flat_pattern_x_spacing” and “flat_pattern_y_spacing” to a value of 3mm+ since there is a lot of retraction happening on first layers when sliced with 0.4mm nozzle OR/AND decrease print speed for the first layer