1 / 4
ONE-FINGER TAPE MEASURE WINDER Parametric (608 BEARING required) — zdjęcie 1
1 / 4

ONE-FINGER TAPE MEASURE WINDER Parametric (608 BEARING required)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Wstępna wycena dla PETG

1,46 € – 1,79 € netto (bez VAT)

Dla pliku: tape_winder_01_0.4n_0.2mm_PETG_MK4S_1h17m.bgcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 1,62 € netto (środek widełek).

Masa podana przez autora
29 g
Czas druku podany przez autora
1,3 godz.
Materiał u źródła
PET
Materiał wyceny
PETG
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Compact. Addictive. Ridiculously Smoothly like Spinner.

Ocena
5 / 5
Polubienia
315
Pobrania
512
Wydruki
7
Wyświetlenia
2892
Oceny
8

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Tired of tangled measuring tapes?
This winder fixes it once and for all — and it does it ridiculously smoothly.

🎯 WHY YOU’LL LOVE IT

  • 🌀 One-finger rewind
    Thanks to the 608 bearing, it spins with almost zero resistance.

  • 🧠 Smart flexible grip
    The compliant “ears” automatically adapt to your tape end.
    👉 No glue. No screws. It just works.

  • ⚙ Perfect press-fit bearing
    Engineered relief slots compensate for print tolerances → always a snug fit.

  • 📦 Minimalist & compact
    Small footprint, lightweight, no unnecessary parts.

  • 🧵 Designed for real use
    Not a gimmick — a tool you’ll actually use every day.


🛠 PARAMETRIC (FREECAD)

Don’t settle for “close enough” — dial it in perfectly 👇

Open the tape_winder.FCStd file:
👉 <<< DIMENSIONS >>>

You can adjust:

  • tape_length → automatically scales spool diameter

  • tape_width → adjusts internal height for your's tape width

  • case_wall_thick → controls case stiffness

or, upon request, I can prepare an STL for the tape dimensions you specify.


✅ Included Files:

  • predefined different sizes of Tape Measure Winder

  • tape_winder_2m_L_20mm_Wide.3mf - 3mf file from PrusaSlicer with predefined settings

  • tape_winder.FCStd - parametric FreeCad project  

  • tape_winder_01_0.4n_0.2mm_PETG_MK4S_1h17m.bgcode - gcode for MK4S 0.4 nozzle, PETG

⚙ MY PRINT SETTINGS

  • Material: PETG

  • Layer height: 0.20 mm

  • Perimeters: 2

  • Supports: it's reccomended to use it to WINDER under the finger spot, but not essensial

  • Infill: 60% honeycomb 3D


📦 HARDWARE you will need to assemble

  • 1x 608 Bearing (8×22×7 mm) ⚙
    👉 standard skateboard / rollerblade bearing


🔧 ASSEMBLY (30 seconds)

  1. Press the bearing into the BASE part

  2. Slide the tape end into the flexible “ears”

  3. Snap WINDER onto the BASE

  4. Spin… and enjoy 😄


🚀 WHY THIS DESIGN IS DIFFERENT

Most tape winders:

  • ❌ high friction

  • ❌ awkward tape attachment

  • ❌ bulky

This one:

  • ✔ spins like a fidget toy

  • ✔ grips the tape automatically

  • ✔ is optimized for 3D printing


💬 FEEDBACK

If you like it:

  • ⭐ leave a like

  • 📥 post a make

Happy printing 🚀

Tagi