3D Printed Solar Cooker Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Solar holder for your foodtray. No more spilling. Two hands free to load or unload your food tray.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 63
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
3D Printed Solar Cooker Holder – Free STL Download and Egg Cooking Test
No more spilling during loading and unloading your foodtray
Loading and unloading a solar cooker can sometimes be awkward, especially when the food tray needs to be held with one hand while adding or removing food. To solve this problem, I designed and 3D printed a simple solar cooker holder that keeps the food tray stable and upright, leaving both hands free.
The holder consists of two printed supports connected with M8 threaded rod and nuts. Four custom insert pieces fit perfectly into the supports and provide solid contact points for the threaded rod assembly. The result is a lightweight but sturdy stand that can be assembled in just a few minutes.
Why I Designed This Solar Cooker Holder
When using a solar cooker outdoors, stability is important. The food tray can become hot and difficult to handle, especially when preparing meals at a campsite or campervan location. This holder keeps the tray secure while food is being loaded or removed.
Benefits include:
Hands-free loading and unloading
Improved stability of the food tray
Simple assembly using common hardware
Easy to 3D print at home
Lightweight and portable for camping and vanlife
Assembly of the solar cooker holder
The holder is assembled using:
2 printed supports
4 insert pieces
M8 threaded rod
M8 nuts
The insert pieces slide into the supports and create strong mounting points for the threaded rod. Once the nuts are tightened, the assembly becomes rigid and ready for use. Watch the video and it will prove it is easy enough.
Filament used
Because the food tray can become very hot during solar cooking, I used a heat-resistant filament (Ngen HT) rated for temperatures up to 100°C-212F
Solar Cooking Test: Hard-Boiled Eggs
To test the holder, I cooked two eggs in my solar cooker without adding water.
The eggs were placed in the food tray, inserted into the solar cooker, and left to cook in direct sunlight. After 26 minutes, the eggs were fully hard-boiled. Cooling them with water stopped the cooking process, and the finished result showed perfectly cooked eggs.
This simple test demonstrates both the effectiveness of solar cooking and the practicality of the new holder design.
The STL files for the supports and insert pieces are available as a free download.
Download the files, print the parts, add M8 threaded rod and nuts, and build your own solar cooker holder for your next outdoor cooking adventure.
Happy solar cooking!
https://www.youtube.com/@StofensteenNlVof/
Mar