Wingspan Americas Hummingbird Tracks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacements for the Americas expansion hummingbird tracks which have ridges that don't let the pieces slide around
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 129
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These are replacement hummingbird tracks for the Wingspan Americas expansion.
They are the same thickness, but smaller in length and width compared to the original cardboard tracks.
If you're interested in something to organize your entire Wingspan game including all expansions with room for future expansions, check out my organizer
Pictured prints are with a 0.4mm nozzle on a Bambu A1 with nearly default 0.2mm PLA standard slicer settings. The only change I made was to print them with an outer brim, 5mm wide with a 0.1mm gap, just to decrease the chances of corner lifting.
The START and hummingbird icons on the spaces are only recessed 0.001" in the model, which will let you easily select them for multi color printing in your slicer, but will still result in a flush surface for your pieces to sit on in the spaces.
I also included a "clean" version of the track with no hummingbird icons on the spaces in case you'd like to remix the model and add your own icons or something.