1 / 4
Teendow D20S Max+ Bag Bypass — zdjęcie 1
1 / 4

Teendow D20S Max+ Bag Bypass

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adapter to hold a magnet that will bypass the sensor in a Teendow D20S Max+ system to allow for any bag that fits.

Ocena
0 / 5
Polubienia
0
Pobrania
12
Wydruki
0
Wyświetlenia
66
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Public Domain

This is an adapter to hold a magnet that will bypass the bag sensor in a Teendow D20S Max+ so any bag that fits the bag slow can be used. The model has a recess for a single 12mmX3mm round magnet, you just need to make sure you have the polarity correct. This could probably be printed with 0% inflill, however I haven't tried that myself.

The square cutout on the one side was to leave an opening for what looks like some other sensor in the vacuum base, maybe a bag fill sensor or something, so I didn't want to block that.

I was able to use these bags, however I did have to cut the carboard insert a bit to fit the slot.
https://www.amazon.com/dp/B0DG2F8W3Z?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

Tagi