Svol SVO8 to SVO8 MAX Nozzle Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This adapter allows you to run SVO8 nozzles on the SVO8 MAX.
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 33
- Wydruki
- 2
- Wyświetlenia
- 309
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This adapter allows you to run SVO8 nozzles on the SVO8 MAX. I am using it to run the MicroSwiss SVO8 FlowTech nozzle on the SVO8 MAX to have a all metal hotend. This is setup to use 2xM3 heatset inserts. If requested I can upload one without heatset inserts but it would only be good for a few nozzle changes.
This requires a printer.cfg change before it will work, then do a full calibration including PID.
# [adc_temperature extruder_thermistor]
# temperature1:25
# resistance1:1268.60
# temperature2:180
# resistance2:1920.98
# temperature3:300
# resistance3:2398.52
# For SVO8 MicroSwiss hotend
[thermistor extruder_thermistor]
temperature1:25
resistance1:110000
temperature2:100
resistance2:7008
temperature3:220
resistance3:435
Sovol SV08 MAX · Micro Swiss FlowTech M3110 hotend · PETG (Anycubic) · Orca Slicer
Setting | Default Plate | Cool Plate (SuperTack) |
|---|---|---|
Printer profile | SV08 MAX 0.4 MicroSwiss | SV08 MAX 0.4 MicroSwiss Cool Plate |
Z-offset (every printer will be different) | −0.25 | −0.28 |
Bed temp | 70 °C | 35 °C (SuperTack) |
Nozzle temp | 235 °C (240 °C first layer) | 235 °C (240 °C first layer) |
Flow ratio | 0.97 | 0.97 |
Pressure advance | 0.04 | 0.04 |
Max volumetric speed (can go faster I went to 30 with no issues) | 24 mm³/s | 24 mm³/s |
Retraction | 0.8 mm @ 40 mm/s | 0.8 mm @ 40 mm/s |
Z-hop | 0.6 mm (Auto Lift) | 0.6 mm (Auto Lift) |
Cooling | 40–90% fan · overhang 90% >10% · off first 3 layers | same |