Svol SVO8 to SVO8 MAX Nozzle Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This adapter allows you to run SVO8 nozzles on the SVO8 MAX.
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 35
- Makes
- 2
- Views
- 322
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
This adapter allows you to run SVO8 nozzles on the SVO8 MAX. I am using it to run the MicroSwiss SVO8 FlowTech nozzle on the SVO8 MAX to have a all metal hotend. This is setup to use 2xM3 heatset inserts. If requested I can upload one without heatset inserts but it would only be good for a few nozzle changes.
This requires a printer.cfg change before it will work, then do a full calibration including PID.
# [adc_temperature extruder_thermistor]
# temperature1:25
# resistance1:1268.60
# temperature2:180
# resistance2:1920.98
# temperature3:300
# resistance3:2398.52
# For SVO8 MicroSwiss hotend
[thermistor extruder_thermistor]
temperature1:25
resistance1:110000
temperature2:100
resistance2:7008
temperature3:220
resistance3:435
Sovol SV08 MAX · Micro Swiss FlowTech M3110 hotend · PETG (Anycubic) · Orca Slicer
Setting | Default Plate | Cool Plate (SuperTack) |
|---|---|---|
Printer profile | SV08 MAX 0.4 MicroSwiss | SV08 MAX 0.4 MicroSwiss Cool Plate |
Z-offset (every printer will be different) | −0.25 | −0.28 |
Bed temp | 70 °C | 35 °C (SuperTack) |
Nozzle temp | 235 °C (240 °C first layer) | 235 °C (240 °C first layer) |
Flow ratio | 0.97 | 0.97 |
Pressure advance | 0.04 | 0.04 |
Max volumetric speed (can go faster I went to 30 with no issues) | 24 mm³/s | 24 mm³/s |
Retraction | 0.8 mm @ 40 mm/s | 0.8 mm @ 40 mm/s |
Z-hop | 0.6 mm (Auto Lift) | 0.6 mm (Auto Lift) |
Cooling | 40–90% fan · overhang 90% >10% · off first 3 layers | same |