Peavey Guitar Amp Replacement Vent

Peavey Guitar Amp Replacement Vent (17-3/8" x 2-1/2")

📐 Dimensions

• Length: 17-3/8" (441.3 mm)

• Width: 2-1/2" (63.5 mm)

🛠 Recommended Print Settings

• Material: ABS or ASA is highly recommended for heat resistance since guitar amp tubes get hot. PETG is a decent runner-up. Avoid standard PLA.

• Wall Loops: 3 to 4 walls (helps keep the screw countersinks strong).

• Infill: 10% to 15% Rectilinear.

• Supports: No supports needed.

• Hole Tolerances: The .3mf file has X-Y Hole Compensation set to 0.20 mm to account for standard ABS shrinkage. If you print in another material and it feels too tight or loose, adjust this setting in your slicer.

🖨 File Breakdown & Bed Size Note

At 17-3/8" long, this part is too wide to fit on a standard 256x256 mm build plate (like the Bambu X1/P1/A1 series) in one piece.

• Ready to Print (.3mf): This file is already split cleanly in half for you so it fits right onto a standard bed. It has all my tested ABS print settings pre-configured. Just print the two pieces and line them up when you screw them down.

• For Modifications or Large Beds (.step): I have also uploaded the full-length, uncut solid model. If you have a large-format printer and want to print it in one piece, or if you need to tweak the design, use this file. Use the ABS settings from the .3mf as a baseline starter.

🎸 Potential Amp Compatibility

This list of models was gathered from online documentation for this vent size. Double-check your own amp's physical cutout dimensions before printing to be sure, but it should match up with:

5150 / 6505 Series:

• 5150 Head & 212 Combo

• 5150 II

• 6505 Head & 2X12 Combo

• 6505+ Head

Guitar & Bass Heads / Combos:

• 3120 Amp Head

• Bass Mk.IV

• Butcher Head

• Combo 115 / Combo 210TX / Combo 300

• DeltaBass / DPB 115

• JSX

• Penta Amp

• Rockmaster

• Supreme XL

• TKO 115

• Triple XXX

• Triumph 60 & 120 Heads

• Ultra 60, 120, & Ultra Plus

• VTM 60 & VTM 120

Keyboard & Acoustic Amps:

• KB 400

• KB2 / KB3 / KB4 / KB5

PA, Monitor, & Mixer Heads:

• 112HS Power Monitor

• MAQ 300

• MAX 160

• Mk VI XP

• Musician

• Programax-10

• Nashville 112 & 1000

• Session 400 Ltd & 2000

• Special 212 II & 212 Transtube

• Stereo Chorus 212

• Transchorus 210

• Transfex Pro & Transfex Pro 212S

• Transformer 212

• XR 600B / 600C / 600E / 680C

• XRD 680 / 680S