Rough Ikea FÖRNUFTIG CAD Model
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A rough CAD model of the Ikea Fornuftig air purifier for use as a fit check for some accessories & mounting hardware.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 59
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
I needed a rough CAD model for the Ikea Fornuftig air purifier / filter that I use in my print tower and didn't have any luck finding one, so I pulled out the tape measure and some radius gauges and whipped one up.
The main dimensions I needed were the exterior trim line, so I could model up a mounting plate for the unit that would be a snug fit, but still allow for access to the filter elements for periodic changes without having to remove the whole unit from the enclosure like the prior version.
The overall dimensions are close enough for a fit check, but in no way would serve as replacement hardware for a damaged unit. Since this is only being used as a fit check, I didn't model out the handle slots, stand, cable routing channel, isolators or hanging mounts. I have included a STEP file for anyone that needs or wants to add those features later.
The Ikea Fornuftig air purifier / filter is a pretty decently priced semi-smart air purifier unit with HEPA and activated charcoal filters, and can move a decent amount of air. I have been using these for years as supplemental print chamber filtration units and have been quite pleased with their performance and how quiet they are. When paired up with individual chamber filters on the CoreOne and other enclosed printers, these all but ensure that any air escaping your print chamber is as clean as you can reasonably make it.
Enjoy!