Reinforced Ring Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Truss rod reinforced ring stand. Made for filtering resin back into bottles, but generally usable as a ring stand.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 27
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this to hold the filter over a resin bottle while draining the vat of my SLA printer. Accommodates 1 kg bottles including some of the larger ones. I used a 1/4 in threaded rod to reinforce the upright and to attach it to the base. Just gluing the upright to the base may be enough. Should work with most funnels.
Print Notes:
sstl's and 3mf versions included
The upright just fits a Mk3/4 print bed. The length of this part makes bed adhesion an issue. I used square mouse ears at each end.(see 3mf file)
Hardware:
1 - 1/4" x 13" threaded rod (6 mm x 330 mm)
3 - 1/4 - 20 nuts (M6 x 1 mm)
1 - 1/4 - 20 x .5 in Hex head bold (M6 - 1mm x 12mm)