Reinforced Ring Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Truss rod reinforced ring stand. Made for filtering resin back into bottles, but generally usable as a ring stand.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 5
- Makes
- 0
- Views
- 27
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this to hold the filter over a resin bottle while draining the vat of my SLA printer. Accommodates 1 kg bottles including some of the larger ones. I used a 1/4 in threaded rod to reinforce the upright and to attach it to the base. Just gluing the upright to the base may be enough. Should work with most funnels.
Print Notes:
sstl's and 3mf versions included
The upright just fits a Mk3/4 print bed. The length of this part makes bed adhesion an issue. I used square mouse ears at each end.(see 3mf file)
Hardware:
1 - 1/4" x 13" threaded rod (6 mm x 330 mm)
3 - 1/4 - 20 nuts (M6 x 1 mm)
1 - 1/4 - 20 x .5 in Hex head bold (M6 - 1mm x 12mm)