1 / 12

Travel Dial Indicator Arm for 1” Dia Pole v13

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

@JC_650_MT

Ocena: 0 / 5
Polubienia: 1
Pobrania: 2
Wydruki: 0
Wyświetlenia: 33
Oceny: 0

Aktualizacja u źródła: 14 cze 2026

Informacje o modelu

Źródło: Printables
Kategoria: Garage
Licencja: Creative Commons — Attribution — Noncommercial — Share Alike

Szczegóły Pliki (8)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (1)

Travel Dial Indicator Arm for 1” Dia Pole v13

This was designed for a 8H6 clearance for the indicator mounting stem. If your printer prints undersized, you can ream it. Mine fits perfect.

This mount is for my new mini granite plate. On the desk beside me.

I went thru 13 total revisions with this design. I only printed version 11 and 13.

This is a Case CAD Design.

If you know what a granite plate in the shop is for, either for production or inspection, you will probably appreciate this.

The sample part came with this old mini Granite plate. It was home made by some machinist. It did not fit any of my indicators. I decided to make one for myself. Version 11 was my Ultimate bridge style design. It works, but I know it could be better.

Version 13 went on to a standard “I-beam” design. A thin web between 2 plates, yes one of my plates is curved.

I did lean to the PRUSA method of square nut pockets, Mine are not press fit, They are loose, so you can replace the nuts if stripped. They shouldn't strip out. I even thought about pausing the print and inserting the nuts, but this way the machine can just print un-attended and I don't have to be there for the pauses.