PMS5003 Air Quality Sensor Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Enclosure for a DIY indoor air-quality station: holds an ESP32, a Plantower PMS5003T particulate sensor and a 0.96" OLED
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 200
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is the 3D-printed case from my build of a local PM1.0/PM2.5/PM10 air-quality
sensor that reports straight into Home Assistant via ESPHome – no cloud, no app.
What fits inside:
- ESP32 DevKit
- Plantower PMS5003T (particulate matter + temp + humidity)
- SSD1306 I²C OLED (128x32)
The PMS5003T air inlet/outlet is left open so airflow isn't blocked.
Designed in FreeCAD; the editable source (.FCStd) is included alongside the STLs
so you can adapt it to a different board or display.
Full wiring, pinout and the complete ESPHome YAML are in my write-up:
EN: https://devmaker.net/en/home-automation/particulate-matter-sensor-pms5003t-with-esp32-and-esphome/
DE:https://devmaker.net/home-automation/feinstaubsensor-pms5003t-mit-esp32-und-esphome/
Print settings (what I used):
- Material: [PLA / PETG]
- Layer height: [0.2 mm]
- Infill: [15–20 %]
- Supports: none