2026 Fox 36 Fork, Fender (mud guard) (MY26)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Front fender for a Fox 36 (my26) fork.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 308
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Front fender the fits model year 2026 Fox 36 mountain bike forks. This uses all four of the 3mm mounting holes on the back side of the crown. It may make contact with the bottom of the steerer tube at full compression, but so far I only noticed that when taking all the air out of the fork for fit testing (it may not happen in real world use, ymmv). The fender available directly from Fox has a dip in this area presumably for that reason, but this fender seems to work fine for my use case.
The one shown was printed in PETG, 0.24 layer height, 0.4 nozzle, 3 walls, 30% cubic infill. Print on the flat surface as shown in the pics with support.
I tried printing one out of TPU, but it was way too floppy, and PLA will likely break too easily (however, PLA+ might be a suitable option). I think nylon would be ideal, but so far the PETG has held up for me.