1 / 1
Side Panel for Commodore 64 Ultimate with 3 Buttons and LED/Logo (no multicolor print)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
If you slice the model yourself, you have to add a pause at 3.8 mm height for the button cover, to insert the 3 M3 nuts.
To build it, you need:
3x M3 nut
3x M3x10 Screw
3x Button (6x6 mm)
1x 5 mm LED
Wires, heatshrink and plugs
Since I had no blue and red filament, I just printed the logo back in transparent and used red and blue sharpie to color it from behind.
I combined the ground wired from the LED and the buttons.
This way, I only had to change the plug of the existing LED since the ground from the buttons is used.
This model was inspired by this design, if you have a multi color printer, check this one out: