Side Panel for Commodore 64 Ultimate with 3 Buttons and LED/Logo (no multicolor print)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Side panel for the Commodore 64 Ultimate with Freeze, Menu, and Reset buttons and illuminated Logo.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 21
- Makes
- 0
- Views
- 317
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
If you slice the model yourself, you have to add a pause at 3.8 mm height for the button cover, to insert the 3 M3 nuts.
To build it, you need:
3x M3 nut
3x M3x10 Screw
3x Button (6x6 mm)
1x 5 mm LED
Wires, heatshrink and plugs
Since I had no blue and red filament, I just printed the logo back in transparent and used red and blue sharpie to color it from behind.
I combined the ground wired from the LED and the buttons.
This way, I only had to change the plug of the existing LED since the ground from the buttons is used.
This model was inspired by this design, if you have a multi color printer, check this one out: