Counting matching models…
If your screw posts are broken off it can be tricky to screw your breadbin case back together. These sleeves are designed to slip over the top of the stump of the broken post and be glued in place, repairing your beloved old brown…
Bring one of the classic Commodore 64 games back to life on your 3D printer. This set includes three pixel-accurate 3D recreations of the original Bruce Lee C64 sprites: Bruce Lee The Ninja Yamo, the sumo wrestler Each character was…
This is the 2026 update of my Enclosure design for the Ultimate series (C6U/ Ultimate Elite 2) User port expansion. (Black or White PCB) It attaches directly to the Tape port for a nice clean look. I would very much like to thank @FrankWL…
Protect your Commodore 64 or VIC-20 from over voltage! This case is designed to accommodate both surface mount (SMD) and through-hole (THT) variants of BWACKS's excellent C64 Saver v2.6. See https://github.com/bwack/C64-Saver-bwack for…
This is the 2026 update of my enclosure design for the Ultimate series (C6U/Ultimate Elite 2) User Port expansion. (Black or White PCB) I also took the opportunity to redesign the mounting mechanism. The previous version could come loose…
A C64 motherboard standoff replacement. These are very often broken in many C64 breadbin cases I see in my repairs on More Fun Fixing It. If you print these in transparent PETG and use UV curable resin these are super easy to fix.
If your screw posts are broken off it can be tricky to screw your breadbin case back together. These sleeves are designed to slip over the top of the stump of the broken post and be glued in place, repairing your beloved old brown…
This is somewhat of a proof of concept, because I don't know if this will work with every C64 enclosure. It relies on a tiny gap between the metal expansion port cover and the enclosure. I've included a test model that you can print to…
Replacment for the handle that always breaks , I printed this in petg , standing on edge like in the pictures
This is a case designed for the Kick-Up-The-Butt reset cartridge for the C64 / VIC20 which goes into the User Port Onshape Model…
There's two versions, one without LEDs and one with five LEDs glued in with hot glue that also acts as light diffuser. I used this DIN cable and this 2.7mm Ultra Narrow 160Leds/m WS2812B LED strip Tape the LEDs to the backing plate…
Another remix of the brilliant Competition Pro Joystick by maciek717 . This one does not suffer from the deformation other remixes have. I am using these uxcell Rubber Strain Relief Cord Boot Protector Sleeve Hose 34x9x6mm 10pcs that I…
Inspiriert durch einen anderen Key dachte ich mir, ich mache mal einen Schlüssel zum Basic :-) Inspired by another key I thought I'd make a key to the basic :-) … 8 bit muss reichen :-) …8 bits has to be enough :-)
Ein C64 Untersetzer für die passende Tasse A C64 coaster for the matching cup … 8 bit muss reichen :-) …8 bits has to be enough :-)
I created this case for the tape adapter included with the ' Ultimate II Cartdrige ' for Commodore 64 by Gideon's Logic . I had previously tried printing cases designed by other creators, but they were too tight for my adapter, so I…
I recommend PETG or ABS/ASA. PLA could theoretically work, but I didn't have the balls to try it. It may or may not fit other TCL models.
Simple case to be used with the BWACK C64 saver 2.1 https://github.com/bwack/C64-Saver-bwack Cable Clamps used RS PRO, Black Nylon 66, Strain Relief Cable Bush, 7.4mm Bundle Diameter P/N 817-8861 4 core 20awg cable diameter 5mm screws for…
Note: I forgot to put on rubber feet on before taking these pictures. This is a cradle to hold the 8BitDo keypad at the proper typing height when using with a C64X. There is hole in the back for the USB-C charging cable which I just leave…
Dieses Projekt beinhaltet eine Adapterplatine für den C64-saver-bwack 2.6 SMD mit passendem Gehäuse. Zuerst werden die LEDs mit einem Abstand von 18mm LED-Oberkante zur bwack-Platine auf die bwack-Platine gelötet. Anschließend wird das…
this ia a right side vent for a c64x case with a dynatron a18 cpu cooler this get the air out of the case quickly, but you lose the usb ports on that side. works good for me and makes a nice hand warmer when cold lol
this is a remix of strudster side intake for the c64x case i moddified it to mount dual 4028 server fans to get air into the c64x case cant use his drive cage with this remix as fans are too big
This is a redesign of the Keyboard Part which now has more detail.
Vertical wall mount for a CaDA C64005w Alfa Romeo F1
Commodore 64 Diagnostics / Dead Test Cartridge Case has been designed for the “ C64 Dual Dead Test & Diagnostic Cartridge & full test Harness ” designed and sold by Melbourne Console Reproductions. The LED is visible through the case and…
I needed a case for the SD2IEC Card reader kit offered by Fascination C64. You need the bottom and top half, 3 of the back knobs and one side knob. The case can be mounted together with M3 screws. They fit into the mounting points of the…
Print halves face up with grid supports inside. Print Pin upright with Brim and organic supports.
Replacement joystick shaft and ring for Retro Games TheC64 Joystick, weather you broke one and need to print a new ones, or just want a different color. Also included a model for the dust cover ring for more customization of the joystick.…
Printed it using PETG but should work fine with PLA too. 0,4 mm nozzle at 0.15 mm layer height, 0.2 mm layer thickness will work fine too. The letters are just one layer thick, if you get troubles sticking them to the bed then try to…
This is a remake of the classic caps for user port board-edge connectors of the Commodore home computers. Each cap consist of a top and a bottom part with additional mounting holes. There are four variants with different openings for the…
Specifically designed as a power connector cover for my PET 2001-8 RAM-ROM-expansion (https://github.com/InsaneDruid/PET-RAM-ROM-expansion) Additional Parts needed 1 x Commodore tape port edge connector 6 x M3 threaded insert (like RUTHEX…
These inserts can be used to key edge connectors like those required on the user port or cassette port of the Commodore 64. Properly keyed connectors will fit the correct way only and can no longer be reversed accidentally. The dimensions…
This is my interpretation of a poor mans C64 Power Supply. Heavily inspired by the Videos of Jan Beta: https://www.youtube.com/watch?v=wWOU2sZv_ng https://www.youtube.com/watch?v=IpuKz0TTB2I All needed parts can be ordered from Reichelt…
For assembly required items: M3x20mm screw x4 M3 nuts x4 M4x15mm screw x2 M4 nuts x2 Support is required only on the base place under the two buttons. It can be left in place and does not need to be removed.
fast small print for missing white part on roller for vacuum cleaner Philips FC6409
Simple keyboard cover for the Commodore C64. The cover fits snuggly over the keyboard only and does not cover the entire case. Has a similar styling to the C64 case with the lines and logo at the top. The cover is fully cut-out to save on…
This is a custom model for the THT version (https://www.chat64.nl/downloads.php) of the Chat64 cartridge. The original model fit a bit tight in my breadbin so I created this and added a few QOL enhancements: The “top” takes an M3xD5…
Needed a clean cap without description on it. Everybody can place a custom description in the slicer.
This is a case for Bwack's modular C64 Saver v2 . See my blog post on this build for more details. Category: Electronics
A blast from the 8-bit past! This model is a pixel-perfect recreation of the iconic fighter sprite from International Karate on the Commodore 64. Every voxel was crafted and colored with care to stay as close as possible to the original…
I needed to remove the shielding around the RF modulator on my Commodore 64 in order to route the HDMI cable from the installed Kawari. I designed these standoffs to support the RF board because the shield was previously doing that job.…
Hello everyone! Today I’d like to share with you my custom-designed holder for the FoxGate ONU Fiber Terminal made specifically to fit the TP-Link Archer C64 router . Inside the provided files, you’ll find three versions of the model: a…
NOTE: Print tilted at 45 degrees angled up off the build plate to provide enough structural support for both the clips and center post. This piece is held into the decorative knob shell with 4 Phillips screws. Simply unscrew the old…
This is a cartridge case designed for the JACC64 - 512K cartridge PCB for the Commodore 64. It is also compatible with normal standard C64 cartridge PCBs and many others too. Uses screws to secure the case. Pure printed solutions never…
This is a cartridge case designed for the JACC64 - 16K cartridge PCB for the Commodore 64. It is also compatible with normal standard C64 cartridge PCBs and many others too. Uses screws to secure the case. Pure printed solutions never…
I remixed the excellent Vic20 clip from Ken into something I have been using to repair a lot of Commodore 64's on my YouTube Channel More Fun Making It.
The C64 Ultimate comes with a transparend site pannel, no matter what version you get. While i think it looks great with the starlight edition, it looks way off on the basic beige, so i created a 3D-printable model. And while i'm at it i…
This is the 2026 update of my Enclosure design for the Ultimate series (C6U/ Ultimate Elite 2) User port expansion. (Black or White PCB) It attaches directly to the Tape port for a nice clean look. I would very much like to thank @FrankWL…
Arcade joystick enclosure for Sanwa or compatible stick two 30mm arcade buttons. Intended for C64 and Amiga use, but could be wired for other retro machines too. Recessed mounting space for a 9-pin D connector, so a joystick extension…
Protect your Commodore 64 or VIC-20 from over voltage! This case is designed to accommodate both surface mount (SMD) and through-hole (THT) variants of BWACKS's excellent C64 Saver v2.6. See https://github.com/bwack/C64-Saver-bwack for…
This is the 2026 update of my enclosure design for the Ultimate series (C6U/Ultimate Elite 2) User Port expansion. (Black or White PCB) I also took the opportunity to redesign the mounting mechanism. The previous version could come loose…
Support for the somewhat flexible keyboard in the C64U Starlight edition
A C64 motherboard standoff replacement. These are very often broken in many C64 breadbin cases I see in my repairs on More Fun Fixing It. If you print these in transparent PETG and use UV curable resin these are super easy to fix.
This is somewhat of a proof of concept, because I don't know if this will work with every C64 enclosure. It relies on a tiny gap between the metal expansion port cover and the enclosure. I've included a test model that you can print to…
Replacment for the handle that always breaks , I printed this in petg , standing on edge like in the pictures
This is a case designed for the Kick-Up-The-Butt reset cartridge for the C64 / VIC20 which goes into the User Port Onshape Model…
Inspired by I also wanted to have a better fitting cutout for the audio-jack and made this version. Yes, the cutout is wider than tall, that's because the PCB can be screwed down with a little shift, abd this should accommodate for that.
Based on an existing user port trim panel design, this one has been tweaked slightly for a better fit on the C64U, and I've added a cassette port cover that provides space for 3 micro tactile switches for the optional menu/freeze/reset…
Is your cartridge stressed from suspending itself in mid-air as it clings to the port for dear life? Do you live in fear that the next press of its button will finally cause it to lose its grip? You need the Cart Couch! After inserting a…
A simple cartridge holder / organizer for Commodore 64 cartridges. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200 Filament: Generic PLA Category: Organization
There's two versions, one without LEDs and one with five LEDs glued in with hot glue that also acts as light diffuser. I used this DIN cable and this 2.7mm Ultra Narrow 160Leds/m WS2812B LED strip Tape the LEDs to the backing plate…
C64 keys Row layout filenames start from the top to bottom, special keys are named. Known missing is the spacebar - will update here when done. Please note the prints in the images are done a few years ago on a printer that was pretty…
It uses the generic 6x6mm tactile switches. Comes with the freecad file to modify it.
Use the screws of the display to fix the case to the module. The holes for the screws have to be drilled by you, but they are marked and can be found easily. Holes left by the printer would result in a messy print (at least for FDM).…
Because I like to tinker with the firmware of C64U I wanted to have access to serial debug port and JTAG connector without opening the case. So now everything is available from the right side. Components used: USB-C breakout board…
Print Options: NOTE: KEYBOARD MUST HAVE FLIP LEGS FULLY EXTENDED Low Profile | Full Profile Everything you need for both types is included in separate folders and the only difference between them is the side insert and cutout's width.…
after my floppy fell down, I had to make a new base. Update 6-2025: updated version because the newer slicers render it incorrectly. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.2 Infill:…
This is my 1st design I haven't worked out the best way to print this, Any help post in the comments. Thanks edit added a version 2 with thicker walls edit 19/10/19 added a version 4 with a curved inside top so able to print the right…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/j8HszXAnQcP Category: Computer
Replaces the broken part of a keycap stem and provides a centering tool for a perfect fit.
Case for USB Joystick Adapter without vents: https://restore-store.de/home/58-usb-joystickadapter-by-donaldsinchai. This should make it easier to apply labels on top of the case All credits go to the original creator
I wanted to build an ultra simple C64 power supply using two wall warts (5v DC, 9v AC) and an extension cord. I used zip ties to help keep the cables from pulling out of the box. I designed this box to contain the power supplies and to…
Looks like there's many different revisions of the C64 breadbin rear snaps/hinges. I wanted a version of banman's design that fit between the vertical supports of my machine, as I'd prefer to limit grinding and modifications to the case.…
The model for the PCB without mounting hole can be found here: https://www.printables.com/de/model/603060-c64-4-player-adapter-v1-by-hucky
Its the cart_stand_c64_wide_x3.stl form @bigby but the first slot is wider to fit a userport connector for e.g. a WIC64
You'll need to remove all of the remaining upper left and right part of the old loop and superglue on the new part sitting on the shoulders of the remainings, see pictures. there are two different sizes, the left clip is smaller then the…
Commissioned work for a retro fan. A (modified) C64 logo as key chain fob.
International Karate Figures The iconic 8-bit player characters from International Karate . Based on the Commodore 64 version. BONUS: The impartial referee is also available. :-) Category: Video Games
Storage for 3 flashlights in a 1x2 size
A shell for the The Orange Cartridge if you got one from the Kickstarter or built one yourself. It uses snap-fits which works really well with PETG. It's not tested with PLA, but if someone has problems with that being to brittle; let me…
If you are running a Commodore 64 without a modulator like the Ultimate64 or use something else inside a C64C case like a Raspberry Pi and you want to get rid of those ugly RF and channel switch holes. Category: Computer
Case for a C64 joystick port switcher like this one: https://www.polyplay.xyz/Joystick-Port-Umschalter-Commodore-64 If you need to modify anything: https://www.tinkercad.com/things/8EMEezukQ8W Category: Computer
Wizard of Wor ( C64 / 8-bit ) | Fridge Magnets All characters from the Commodore 64 port of " Wizard of Wor ". Just ... slice and print them in your preferred size glue some tiny magnets on the back (add some color to Worluk with…
Panama Joe (Montezuma's Revenge | C64 | 8-bit) The original tomb raider from back in the 80s. :-D Based on the sprite from the Commodore 64 version. La cucaracha! (Wikipedia: Montezuma's Revenge Category: Video Games
Every c64 at least needs a Kernal switcher to take full advantage of JiffyDOS or other useful modifications. This Hood for the C64c case is put on top of the original case, and can keep any switches, displays, or whatever else you want;…
I've designed a case inspired by the Commodore64 in onShape. It's tailored to the components that I had but the original model is available here and I'm including all the STEP files so you should be able to make the modifications you…
The VAC-cartridge for the C64 has been introduced here: https://www.forum64.de/index.php?thread/52749-heute-so-gebastelt/&postID=1813929#post1813929
All you need to bring back your C64 breadbin case in a neet conditions
Next of the C64 cartridge's housings collection. This time I designed case for The Expert cartridge by Retrotinker/Dirk Wouters. Take a look on attached pictures. The case can take an ICs in a sockets, up to 10mm high. In the slicing…
Das Gehäuse enthält einen Schnappverschluss, so dass es keine Schrauben benötigt.
Es gibt 2 Versionen von diesem Gehäuse. Entweder eine Version mit Schnapp- oder Schraubverschluss. Für den Schraubverschluss werden 2 Schrauben 2x20mm benötigt. Für die Schraubvariante braucht man nichts weiteres.
Cover for the 9pin Joystick ports on the C64. Could glue in bit of antistatic foam for tighter fit if needed. I tested this on a C64 breadbin and the Ultimate64. Print Settings Printer Brand: Prusa Printer: I3 MK3S Resolution: .20 Infill:…
Motherboard standoffs to replace cracked, broken or missing standoffs in the bottom of the breadbin cases. I made them extra wide on the bottoms for enough glue to surface contact. Sand down what is left of the broken standoffs. Screw the…
Simple box to hold an Arduino Pro mini so you can double stick tape inside the C64 case. for switching a c64 multi rom mod. Adrian's Basement did a video of this simple mod. It is a press fit for arduino but you can use double side tape…
I/O trim plate to for the user port area of Commodore 64 using the Ultimate 64 main board. This slides into the case before sliding the board into it. No modifications or screws needed to hold it into place. I have version 1.2 of the U64,…
plugs for the RF output and channel switch slots on the C64c case. Great for Ultimate64 or pi64s. Simply snap to fit into place. No case modification needed. UPDATED: Now Added Breadbin plugs. Print with supports. Breadbin plugs slide…
