2 C64 stack mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I was looking for a way to stack 2 C64s without building a rack or so. I came up with this, eventually.
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 110
- Makes
- 2
- Views
- 717
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
I was looking for a way to stack 2 C64s without building a rack or so. I came up with this, eventually. The lower C64 can be moved forth and back a bit to adjust the position to personal needs. I may create another version that can be linked but the current state is very stable and therefore it is perhaps not required.
C64s not included ;)
Print instructions
I've printed this with PETG since PLA tends to deform under load after a while. I went for top/bottom 5 layers and 3 perimeters and 50% adaptive infill. It's perhaps a bit overkill, the print time is about 8 hours per piece so maybe less layers/perimeter will do as well.
Adjust position to bed size.