My Retro Computer C64x Internal HDD Caddy
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an internal 2.5 inch HDD/SSD caddy/mount for the C64x PC case from My Retro Computer (Kickstarter version).
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 31
- Makes
- 1
- Views
- 355
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
This is an internal 2.5 inch HDD/SSD caddy/mount for the C64x PC case from My Retro Computer (Kickstarter version).
It requires no screws to install but does include 2 printable clips that push down over the sides to lock it more firmly in place.
It can not be used if the external HDD dock option has been installed in the C64x case. It would be unnecessary in this instance.
It is compatible with other C64x mods I have designed as shown in attached photos.
Note: Likely incompatible with versions of the C64x case that were available before the My Retro Computer Kickstarter due to some changes to the internal mounting hardware.
Instructions
Prints fine without support but can be used for improved detail. Brim optional but depending on printer may be required for the thin outer sections. If support is used ensure that the material is removed from the 4 standoff holes underneath before installation.
Mount the caddy on right side of the metal frame. It will click into place over the four metal standoffs. Push the 2 included clips down over each side. They should tighten near the bottom and help hold it more firmly in place.