Turn signals for Ninebot F3/F3 Pro (must be suitable for G3/Zt3)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The models were made for the F3/F3 Pro scooter, but they should also be suitable for the G3/ZT3.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 91
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
The models were made for the F3/F3 Pro scooter, but judging by the data on the Internet, they should be suitable for the G3/ZT3.
I couldn't remove the original rubber pad without damaging it. Therefore, I made a separate model for her, which can be printed from elastic plastics.
I also made models in which lamps are not inserted, if someone just needs plugs, there are 2 versions of them, with a removable cover and a one-piece.
The original rotary lamps have guide pins, on one lamp it is a square pin on the other triangular. I wanted to make a hole suitable for both lamps, but after several attempts, it only matches the square one, I broke off the triangular pin.
The models in the files are positioned as I printed them. If you print the logo with the logo facing down, I didn't like the result.
It is worth drawing supports under the outer rim (as shown in the picture) so that there is no sagging at the edges.