1 / 3
Turn signals for Ninebot F3/F3 Pro (must be suitable for G3/Zt3) — image 1
1 / 3

Turn signals for Ninebot F3/F3 Pro (must be suitable for G3/Zt3)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The models were made for the F3/F3 Pro scooter, but they should also be suitable for the G3/ZT3.

Rating
0 / 5
Likes
1
Downloads
6
Makes
0
Views
91
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Noncommercial

The models were made for the F3/F3 Pro scooter, but judging by the data on the Internet, they should be suitable for the G3/ZT3.
I couldn't remove the original rubber pad without damaging it. Therefore, I made a separate model for her, which can be printed from elastic plastics.
I also made models in which lamps are not inserted, if someone just needs plugs, there are 2 versions of them, with a removable cover and a one-piece.
The original rotary lamps have guide pins, on one lamp it is a square pin on the other triangular. I wanted to make a hole suitable for both lamps, but after several attempts, it only matches the square one, I broke off the triangular pin.
The models in the files are positioned as I printed them. If you print the logo with the logo facing down, I didn't like the result.
It is worth drawing supports under the outer rim (as shown in the picture) so that there is no sagging at the edges.

Tags