Counting matching models…
Simple 90 degree angle mount for the Segway Navimow i105e/i108e antenna. Designed to be printet without supports. Really sturdy with these print settings: 0,2mm layer height 3 walls 5 top and bottom layers 25% grid or gyroid infill If you…
This is a remix from @massis to mount the Navimow's GPS receiver with a 90° angle.
Messerteller für den Navimow i series. (getestet auf einem i105e, sollte auch für den i108e passen) 6 Klingen und 20cm Schnittbreite (original hat 3 Klingen und 18cm Schnittbreite) Benötigt werden neben den Klingen und den Schrauben nur…
Support pour fixer une case WILD MAN sur trottinette Segway ZT3pro 3 vis M5x25 inox 3 rondelles M5x12 inox Remplissage à 100/100 Matière utilisé ASA, après libre à vous d'en utiliser un autre.
Combined can holder and hook for attaching to steering shaft. M3x5 screws + nuts used.
Eine Wandhalterung um das Netzteil sicher aufzubewahren und zu schützen. Das Segway-Netzteil / Trafo Halterung passt zu folgenden EU-Mährobotern: Navimow H500E Navimow H800E Navimow H1500E Navimow H3000E / H3000E VF Navimow i105e Navimow…
Simple 90° angle mount for the Segway Navimow. I chose a design that is easy to print. I used PCTG for temperature resistance. 25% cubick infill 5 top and bottom layers 4 perimeters
Vielen Dank an die Ersteller der Modellvorlagen, die Maße passten bei mir perfekt! https://www.printables.com/de/model/920133-segway-navimow-i105e-messerteller-fur-6-klingen-un…
A Flexible Sock to go over the Scooter's side stand. Reduces chance of damage to floors and ankles and shins. I used: Filaform RED90A 0.8mm Solex Nozzle 100% infill If you place the closed end on the build plate, no supports are required.…
Upgraded Wheel and Tread system for the Segway Navimow i Series! When I first got the Navimow I was so disappointed I was planning on returning it. It couldn't navigate the grass at all. It would get stuck left and right. I turned to…
infill:30-100 supports: yes brim: optional walls: 2-4
The Segway Navimow robot mower has a compartment that is intended for their Navimow Access+ 4G Module cellular theft-tracking tracking accessory that is $150 USD and that doesn't even include the cellular fee you have to pay after the…
I redesigned this hook to both improve the general look and feel to more seamlessly blend in with the general design of the Segway Ninebot Scooter and I also wanted to make it stronger and more effort to remove. This hook can easily…
Messerteller für den Navimow i series. (getestet auf einem i105e, sollte auch für den i108e passen) 6 Klingen und 20cm Schnittbreite (original hat 3 Klingen und 18cm Schnittbreite) Benötigt werden neben den Klingen und den Schrauben nur…
Mount for a Segway Navimow GPS antenna, made to fit on a standard 90mm wood beam as I wanted to mount mine up on top of our pergola in the backyard.
Taschenhalter für Segway Ninebot Max G30D II Die Tasche wird normal Innen befestigt. Ich bin jedes Mal beim Auf oder Absteigen daran hängen geblieben. Wenn man sie Vorne und am Lenker befestigt, wird das Licht verdeckt und man kommt…
Messerteller ist 220mm groß mit Messerklingen 254mm Schnittbreite mehr geht nicht. Messerschutz wurde auch erneuert und für den größeren Messerteller vergrößert. Mähgeräusche etwas lauter. Mähtest laufen noch. Was benötigt wird…
Replaces the OEM "skirt" and adds extra bumper width on the right side to avoid getting stock around sharp corners. Scanned the shape with a “Revopoint Miraco PRO 3d” Scanner for optimal fitment.
Base holder is made out of two parts, front and back. Update 20240806: There is now a V2 with mountable threads also for front and back, can be combined with old V1 for left, back and right or left, front and right mounting. Screws and…
vycentrované použité závitové vložky do plastu M4 , šrouby původní ( v originálním balení jako náhradní s bříty 9 + 9 ks ) použil jsem ASA , určitě by vydržel i z PETG bílá barva na unašeči není vada tisku ani materiálu :-)
For Ninebot Es1 Es2 Es3 Es4 kickscooters.
I modeled this handle to carry this scooter more easily by one hand, if mounted as in photo, its quite balanced. If you want, you can print one piece of “Handle clamp hole” so you can carry your allen key here as in photo. I've been using…
I made this bracket is to be mounted on the steering column on my Segway Ninebot Kickscooter MAX G30D II (Please note that im on a beginner level, when it comes to designing parts in fusion 360) Its a tight fit around the steering colom,…
A replacement for a paper ruler that fell apart after a few uses.
Safety for the Ninebot folder mechanism. Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 20 Notes: I used archimedean chords infill to have more flexibility.
After reading about blade disc tuning, I've decided to try my own version. The idea was to use the original disc and have a minimalistic, lightweight design. It worked flawlessly last season on my H800E. Printed with PETG, 100% infill.…
Um den Abstand zwischen Scheibe und Klinge wie beim orig. nachtzustellen, empfehle ich noch zusätzlich eine 4mm Scheibe beizulegen. Damit drückt sich auch der Schraubenansatz nicht in den Kunststoff ein. Verwendet werden normale M4…
i made my own rear fender for the Monorim rear suspension, the one they supply is a 2 part fender that is just horrible in my opinion. I broke min within 1 week, so i designs my own. when you print is you need to slice it in half and if…
Tested with Navimow i series i105e Additional things 8x threaded inserts (M4×8,1×6mm) 8x blades Tested with ASA at 15% Infill The noise increases slightly after installation NOTE: Use at your own risk!
Case used: https://de.aliexpress.com/item/1005009165100557.html?spm=a2g0o.order_list.order_list_main.40.30d95c5fX0qWQt&gatewayAdapt=glo2deu
This holder allows you to mount the Navimow GPS RTK antenna to a location where a longermounting distance is necessary. The pipe is 20 cm long.
Kickstand-shoe for Segway Ninebot F3/F3Pro/MaxG3 for better stand and stabilisation of the original-delivered Kickstand. Material must be TPU!! With this part you elevate the angle of the Escooter in the stand-postion for about 4 degrees.…
The thing that this thing is based off is so flimsy! I accidentally dropped my e-bike and it broke off. So I started to look for replacement parts. I know this thing can be found easily on Alliexpress on the cheap but my problem is it…
Mounted with M3x5 screws + nuts
small video preview gland TC 16х30х4,5 example: https://ozon.by/product/manzheta-armirovannaya-salnik-tc-16h30h4-5-1281241717/?__rr=1 https://youtube.com/shorts/HhOks5Je0Po Category: 3D Printing
Modulare Wandhalterung Für Segway Navimow i Serie. Länge des Auslegers kann man selber bestimmen hab es so Konstruiert das eine Garderobenstange benutzt wird. Länge frei wählbar. 17.06.2024 Update habe noch mal einen Adapter konstruiert…
I created this adaptor plate because I wanted a cup holder on my electric scooter. There was a lot of options for bicycles (even a standard mounting system) but nothing for a scooter. This adaptor plate bolts onto the steering stem of the…
Die Halterung eignet sich perfekt zur Montage der Segway Navimow Antenne an einer Wand. --- The bracket is perfect for mounting the Segway Navimow antenna on a wall.
segway 9bot kick scooter wall mounts
Please like model, if you are satisfied. Antenna mount to roof for Segway Navimow. Height 54mm.
The Segway Navimow has impressive navigation capabilities and even offers manual control via the mobile app over a Bluetooth connection. However, like most robotic mowers, it tends to leave a fairly wide strip of uncut grass along the…
This handle allows you to more easily pull your scooter in its folded form rather than having to carry it. Its consists of two clamps that attach a bar/tube to your handlebar to be used as grip. The clamps are designed with 22mm diameter…
Keep your Samsung SmartTag 2 hidden inside your Max G3 scooter. Fast and easy print that slides into the top of the stem. Just remove the four screws underneath handlebars and slide the print into the hole. The SmartTag should be friction…
zakladna 100x100x107 tisk je z ASA vrstva 0.20 Vytvořen gcode pro MK4 stl soubor vsechny tiskarny
a simple cup holder for my e3 scooter, should fit any vertical post with a 2.25" diameter. sized to fit regular cans for ummmm...soda.... on the go, or smaller tall cans like red bulls or those ice drinks. attaches with zip ties through…
Quick replacement for the turn-signal button of my Max G2. Print in TPU Needs glue Category: Other
I needed a light and quick to apply lock for my new Ninebot Max G2 eScooter. The Abus Sportflex 2504 was my choice. It’s small, light weight with a 90cm retractable cable quite long, keyless with a 4 digit code lock and mounts into the…
Supports de fixation pour monter des rétroviseurs du modèle suivant : https://fr.aliexpress.com/item/1005006240911627.html?spm=a2g0o.order_list.order_list_main.41.5b315e5b4D4Zaq&gatewayAdapt=glo2fra Si j'ai choisi ce modèle, c'est parce…
Cover to protect the inner body of the scooter from dust, stones and dog shit particles. Print Settings Printer: selfmade Rafts: No Supports: No Resolution: 0.2 Infill: 100% Filament: sunlu PETG red Category: Automotive
A couple of Gridfinity bins to hold a “year's worth” of extra Segway Navimow blades and screws. The blade bin stores the blades in a way that keeps the sharp sides safely stowed, but still easy to pick out when needed. Print with your…
The Ninebot max G2 is a great kick scooter and already has good indicator lights built into the steering bar ends. The downside is that those indicators are hardly visible from behind because the driver blocks them from view. Since the…
- Brake Disc 155mm - Complete Rasperry Pi Display Cover - Radiator plate
Plate for Ninebot MAX G30 II
Oryginaly printed with PLA
Luggage hook for Segway ninebot F series to mount on the steering axle. The hook is also known on scooters as a Chinese hook because it is often used to hang a bag when you have gotten food from the Chinese takeaway. Assembly: Unscrew the…
I made these handle bars so I can push my kids on the scooter, I have been using these for couple months and they work great, without any failure. You can easily remove the handlebars with allen key when not in use. I DO NOT recommend to…
Wem die LED zu auffällig ist, kann diese Blende anwenden. Ich würde mich über ein Foto dieses Objekts freuen.
Blade disc for Segway Navimow H1500E that has 6 blades instead of the original 3.
Hooks mounted on steering rod with with M3x5 screws + nuts
This is a simple model designed to bring peace of mind for a friend whose child is riding a Ninebot scooter to school. The Air Tag holder helps keep the scooter findable, while the hook allows the student to hang a helmet or a backpack.…
This wall mount was designed to mount the AC Adapter for a Segway Ninebot Scooter or GoKart which use the same power interface. Not for the OEM Ninebot AC Adapter. You can purchase the AC Adapter seen in the photos using this link : 63…
Quick and easy iPhone 13 holder for my kids Segway Ninebot scooter, have to remove the handlebar off to slip it around the shaft. Created mine with PETG Galaxy Black with organic supports enabled from the bed. 2 nos M4 x 15mm and nuts are…
This is a "stronger" and "taller" version of an RTK mount. The original was a good base, but he antenna was still below the roof line. This brings it up higher and is extremely strong. The weakest point is probably the two screws that…
Print with 100% infill
JREV Complete collection of GT2 scans
Cover for the taillight. For charging only Print Settings Printer Brand: Prusa Printer: I3 MK3S Supports: No Category: Automotive
Распечатайте столько слоёв, чтобы заполнение не было рыхлым. @Модели должны быть правильно позиционированы при печати. @Выбирайте именно то, что вам нужно. @Зазоры установил на 0,1, и было бы здорово точно настроить принтер при печати. @Я…
Version 2 Version 2 is designed so that you don't need to remove the key and reinsert to remove from the holder. It has less plastic and empirically has less plastic and therefore potentially less rigidity, but in my experience it has…
The Ninebot Max G3 comes with mounting points for a supplementary battery, but I decided that a better use for these is to hold my Kryptonite Evolution Mini-7 lock. Features (that differ from the original) Slit for the key to be left in…
This replacement Blocking Wrench is used to easily and firmly tighten the Segway's steering height. Cette clé de remplacement est utilisée pour permettre de bloquer fermement et facilement en hauteur le guidon de Segway.
This was designed specifically for the Segway GT1 / GT2. Print it and stick it to the under side of the scooter with some double sided tape and press in the lights. It will take some force to press in the lights as it is designed to be…
2 nos M4 x 15mm and nuts are required, the holder size is 55.6 x 20.8, and Upload the Solidworks Source file also, have fun! Print Settings Rafts: Doesn't Matter Supports: Doesn't Matter Category: DIY
You will need a 25.4 mm (1") metal pipe with a length of 255 mm. I used a seatpost from a children's bike. 4 bolts with nuts and washers M4x25 2 self-tapping screws 3x16 (optional) for fixing the pipe. I provided holes for them, but I…
Segway Navimow X3 Series Antenna Mount Mount to a wall, roof peak, or under a gutter. Length: 230mm Width: 90mm Height: 80mm Simple printing, no supports needed. I recommend printing with PETG; 5 layers; 45% gyro.
Tired of having to swap 3V coin cell batteries on your Segway X2/i2 remote? This design converts the Segway InfoKey to a 1200mAh lipo battery with 500mA USB-C and QI wiress charging. Takes 1h15m to print on the MK4 with InputShaping The…
I broke one (of 2 delivered) original Segway Ninebot Mirrors-Silikonbelt for F3/F3Pro/MaxG3/ZT3. So, for fast repair, I construct a compatible holder only. The original is for shure the best Material (Silicon?) but this here can be…
Protective caps for front wheel bearings Segway-Ninebot KickScooter P100S Print with soft rubber-like materials such as Soft TPU. Be sure to use lubricant during installation. Sprays don't work. Added updated version of rigt cup Print…
a housing to secure the power supply to a lock Print Settings Rafts: No Supports: Yes Resolution: 200 Category: Automotive
This adapter will allow you to mount the Segway Navimow (i110 at least) RTK to chainlink fence posts. This may allow other "poles" that are about 1" (25.4mm) thick to attach to chain-link posts. There is a extra little "hole" on the side…
This same size fits the newer 2025 Segway models as well using the circular 42mm stem. I've tested this on the Segway F3 Pro. Brackets are customized to fit the Onguard Brute lock. Requires: 1. 8x M3 nuts 2. 8x M3x12mm bolts The nut…
My son just got a Playmobil Segway police scooter, but this thing won't stand upright and does not have any blue flash lights. This thing fixes these issues. Just print and snap in place. I added the color changes manually since this is…
A heavy-duty hook specifically designed for the Segway Ninebot Max G3 (G30 series) scooters. Optimized for carrying heavy 1.2L (40oz) Stanley Quencher tumblers or similar water bottles securely. Compatibility: Fits Ninebot Max G3, G30P,…
I made this for the Segway MiniPlus which I got second or possibly third hand. the hubs were pretty badly scratched up and also dug into the sidewalls of the tire, so I took it off, but then the led was just too bright and exposed so I…
Hi, I was recently disassembling a friend's scooter and saw the controller, and I got an idea :) A little bit of internet, a little bit of money and a built-in battery from another scooter brought it back to life. You will need: XT30…
Couldn't source the part so decided to try and use cad and copy it. Part fits perfectly.
Tested only on the Ninebot es2, but most of the es series should be able to use this. This tool makes putting on a tire super simple. Print it with 4 walls and 30% infill. To use it, take the old tire of, I prefer to cut it with a knife.…
I have a smaller printer so I cut it into 4 pieces.
A sturdy wall-mounting arm for the Segway Navimow RTK antenna, designed to fit the Navimow X-Series (X450, etc.). Helps mount the antenna to a shed, wall, or fascia board to get better satellite signal. Built-in Cable Routing: Features a…
Couldn't find any suitable mirror for my Max G2 but I only use one of these cheap ones on my bike so created an adapter to use the mirror itself at the tip of the turn-signal. Reuses original screw from the turn-signal's top and an M3x16,…
Kickstand Shoe for Segway Ninebot F3 Pro D (may work on other models too) for better stand, stabilization and easier reach. Printed in TPU, 0.4mm Nozzle, 0.16mm Layer-Height, 3 Walls, 10% Cubic Support see last picture.
FRANÇAIS Chaussette souple pour le pied de béquille de la Segway Ninebot MAX G3, conçue dans Autodesk Fusion. Elle recouvre le pied et évite le contact direct du métal avec le sol. Impression Matériau utilisé : TPU 95A Flex. Utilise ton…
A simple idea: carry the F3/F3 Pro with two hands WITHOUT having to touch the under-deck. This handle hooks into the floorboard hook for stowing the handle-bar. Keep this handle in your pocket or pack. Just grab it, put it in the hook,…
This is a little bit obscure, but I wanted to attach a "Go Brightz" light to my Segway's steering bar, so I made this cl
Segway Ninebot Air T15 Keepcup Holder
Bagde replacement for mower garage Parkside PUMRG 68 A1 that says Segway. It is meant for the Navimow grass mower.
This is a baseplate to mount the Segway Navimow X4 (X430, X450) "EFLS" (RTK GNSS/GPS) antenna base station pole/mast to a horizontal surface (with second design for a surface with a 5º tilt ). A machine bolt/screw is used affix the pole…
This is a pair of models to mount the Segway Navimow X4 (X430, X450) "EFLS" (RTK GNSS/GPS) antenna base station pole/mast to a vertical surface (with second design for a surface with a 3.5º outward tilt ). Two mounts: Lower mount: Has a…
FRANÇAIS Chaussette souple pour le pied de béquille de la Segway Ninebot MAX G2, conçue dans Autodesk Fusion. Elle recouvre le pied et évite le contact direct du métal avec le sol. Impression Matériau utilisé : TPU 95A Flex. Utilise ton…
I designed this license plate holder because the original holder has only one mounting bracked and was a bit wobbly, so that after a while the holder broke off. Should not happen again with two mounting brackets. The clamp has to be…
