1 / 1
Ninebot/Segway Tire tool
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
simple and effective.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 14
- Makes
- 0
- Views
- 273
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Tested only on the Ninebot es2, but most of the es series should be able to use this.
This tool makes putting on a tire super simple.
Print it with 4 walls and 30% infill.
To use it, take the old tire of, I prefer to cut it with a knife.
split the hub-motor to remove the motor from the rim.
now bolt the adapter to the rim, place the tire on the ground and put the adapter on the tire and step on the rim. I prefer to lube the adapter with some dish soap to make it easier.
You might have to hit the tire a little with a hammer to get it fully seated.
Good luck!