Counting matching models…
Wall mount for Ninebot ES2 Scooter. Can be attached with strong double-sided tape or screw into wall. I would recommend resting the scooter front wheel on the ground and use the mount to brace the scooter to the wall. **** I would not…
ES210X-M2 10" Rack mount I recently upgraded the networking in my house and needed to get the clutter cleaned up. Enter the 10" rack. This is a VERY tight interference fit, designed to not need screws to lock the switch in place. Make…
When the Segway ES2 has a battery upgrade (ES4), the balance point of the kickscooter are right at the bottom of the battery, making it hard to carry. This handle allow you to carry your segway when it is folded down. Update: Added a…
a simple cup holder for my e3 scooter, should fit any vertical post with a 2.25" diameter. sized to fit regular cans for ummmm...soda.... on the go, or smaller tall cans like red bulls or those ice drinks. attaches with zip ties through…
Where Art Meets Acoustics – Elegant Design Meets Additive Precision. After a long development journey, it’s finally here: I want to show you the Headphone Lines2 - Holder . The Story Behind the Design This project has been a true labor of…
Oryginaly printed with PLA
Just remix from TPLink, adjust the heigh and width.
Cover for deck bottom window.
uses upto 5 6x2 magnets. 3x card standoff holes are for m3 heat set inserts. Expander does get warm so might not be suitable to print in PLA. Print with enough walls/add modifier so the top 3 standoffs are printed solid.
This is a simple bracket to mount your Ruijie Reyee RG-ES205GC-P POE Switch to the wall or under a desk. Print with anything. No supports
This is the shell for the SNES2VGA dongle project. It allows the transmition of RGBs video signal and stereo audio through a VGA cable. For details, please visit the project GitHub page for parts and instructions:…
Hobbyking ZD Racing Pirates2 TC-8 DIFF LOCKER use this in your rear diff for some serious Drifting Print instructions Infill: 100%
Beermats - round and square for those amongst us who want a second Scottish Independence vote. Dark Blue and Light Blue STLs are used in both. Use just White2.STL for the round beermat and both White2.STL and Outside White2.STL for the…
Wall Holder for Cordless Screwdriver Set In 4 different Variants. With logo for WORX, KS-Tools and Kiprim as Well, without LOGO. Happy Printing… Set on Picture: KS-Tools 515.3699 Printed on: Original MK3S+ Filament: NOYES PLA Grey
This is a TP-Link ES205G switch vertical mount for a DIN rail. Parameter Recommended Nozzle 0.4mm Layer height 0.15mm Material ABS, PETG
These are skids for the Hobbyking ZD Racing Pirates2 TC-8 1/8 scale touring car. the following cars are identical: DFModels Street Racer PRO Modster Tayphoon You'll need some longer screws. enjoy ;)
This is a fan mount for an Intel RES2SV240 SAS Expander card, it is designed to hold a 40mm fan over the heat sync. The fan holes and PCB stand offs have 5.5mm holes meant to accept M4 threaded brass inserts. This is a collaboration…
Simple protection for your Happymodel ES24TX Module Printed in TPU - No Supports Needed Added a small strip of servo tape to the bottom to secure it solid, but may not be necessary. (See Pic circled in RED)
I had a switch, and the mod10 rack has a top & bottom row that are only 0.7U. Guess what. Contents This is a rack mount tray for TP-Link ES208G L2 managed switches, and them only due to the locating mechanism (their feet). Recommended to…
Problem: Needed to fit a 10" patch panel into a standard 19" server rack while maximizing space for networking equipment. Solution: This adapter bridges the gap, allowing you to mount a 10" patch panel in a 19" rack and integrates a…
Hi, I was recently disassembling a friend's scooter and saw the controller, and I got an idea :) A little bit of internet, a little bit of money and a built-in battery from another scooter brought it back to life. You will need: XT30…
Flush, friction-fit mount for a 10-inch 1U rack. The 2x2mm side airflow openings are fully modeled into the design. I printed with PETG on Flashforge AD5M without support. Recommended print settings: 0.20 mm or 0.25mm layer height…
I don't like the Ironman design that Happymodel put in the Xlite module for Expresslrs so I designed this simple lid to replace it. Due to the limitations of 3D printing and with the aim of making the model support free I didn't add the…
I screwed my Intel RES2SV240 into this via 2 screws (I think short M3s) then used double sided tape to place it at the bottom of my new server case. I felt better having some plastic in their as opposed to metal from the card directly…
This is a modified version of Solidware's design on Thangs. https://thangs.com/Solidware/JR-Module-Bay-ExpressLRS-No-Screws-No-Supports-16442 I use my t-lite for flying a Tello too, and I made phone holder arm out of gopro mount parts.…
“James2” Floor standing wall illuminating lamp This is a design for a WLED powered wall illuminating lamp that is powered via an ESP32. It reacts to music, has cool effects, and is powered via USB-C! Please note that the guide below is a…
Fix low speed turn flips Made from ABS https://www.youtube.com/watch?v=MMXJWN5t0G4
This remix modifies the design for use with the Happymodel ES24TX Pro 1W ELRS module. The original version of this case was designed for the older non "Pro" 1W version. This is designed to replace the original main body of the module to…
I printed this great design by Russell Dame but the print stopped at about 80% (filament got stuck...). Nevertheless, it was good enough to mount the switch on the rack. Although the switch was constrained by friction, it still moved when…
own a ES24tx pro? need to access the usb often? dont want to buy a new module? well do i have the mod for you, for the low low price of making your module ugly as hell you can have easy instant access to the usb port for like mavlink over…
The train illustrated in the image is an example of a vehicle of this model. S=1/150train
This is a TP-Link ES205G switch vertical mount for a DIN rail. Parameter Recommended Nozzle 0.4mm Layer height 0.15mm Material ABS, PETG
Best to print on side with supports/raft. Hole for M4 heat insert .
Case for the upcomming SNES2C64 There is th scad files that has lots of options to choose from when used in the customizer app or in openscad. namely: 3mm or 5mm led's resetbutton present or not snes_connector_style usbcutout or closed…
this is a toothpaste squeezer with a ratcheting mechanism and a release to remove the empty tube. theres a lever to release the ratchet to remove the empty tube. no supports
