4mm Screwdriver Socket Bits - M2, M2.5, M3, M4, M5
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Different-sized socket bits for any 4mm screwdrivers, with a hole for a magnetic M2 screw.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 56
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Adapt any precision screwdriver that takes 4mm bits into a tiny portable socket driver! Great for holding and tightening nuts, especially with an electronic screwdriver.
The stem has a hole for an optional M2 screw, letting you add a magnetic screw to hold them securely. Scale them up a little bit in the slicer to make them press-fit instead.
I tested M2 and M3, they work great. I also tried M5, but it's really the upper bound, the print is likely to crack if torqued down tight at those sizes. But for a quick hold-down job it's still fine.