Opel Astra G Interior Rear View Mirror Support Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement interior rear view mirror support bracket for Opel Astra G. This 3D printable part is designed as a replace
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 106
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Recommended printing settings:
Material: PETG, ABS, ASA, Nylon or strong PLA+
Layer height: 0.16 - 0.2 mm
Infill: 50% - 100%
Walls/perimeters: 4 - 6
Top/bottom layers: 5 - 7
Nozzle: 0.4 mm recommended
Supports: Yes, depending on orientation
Print orientation: vertical or slightly angled for best strength around the ball/socket area
Bed adhesion: brim recommended
Post-processing: light sanding may be required for final fitting
For best durability, PETG, ABS, ASA or Nylon are recommended. Standard PLA can be used for testing, but it may soften or deform inside a hot car during summer.
Before final installation, test the fit carefully. The ball joint area should be firm, not loose. Do not force the mirror violently during assembly, because printed plastic can crack if the tolerances are too tight.