1 / 3
Opel Astra G Interior Rear View Mirror Support Bracket — image 1
1 / 3

Opel Astra G Interior Rear View Mirror Support Bracket

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Replacement interior rear view mirror support bracket for Opel Astra G. This 3D printable part is designed as a replace

Rating
0 / 5
Likes
2
Downloads
18
Makes
0
Views
108
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial

Recommended printing settings:

Material: PETG, ABS, ASA, Nylon or strong PLA+
Layer height: 0.16 - 0.2 mm
Infill: 50% - 100%
Walls/perimeters: 4 - 6
Top/bottom layers: 5 - 7
Nozzle: 0.4 mm recommended
Supports: Yes, depending on orientation
Print orientation: vertical or slightly angled for best strength around the ball/socket area
Bed adhesion: brim recommended
Post-processing: light sanding may be required for final fitting

For best durability, PETG, ABS, ASA or Nylon are recommended. Standard PLA can be used for testing, but it may soften or deform inside a hot car during summer.

Before final installation, test the fit carefully. The ball joint area should be firm, not loose. Do not force the mirror violently during assembly, because printed plastic can crack if the tolerances are too tight.

Tags