Fidget spinner with 608 bearing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fidget spinner which has a bearing inside.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 105
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Smoothly-running fidget spinner with 608 bearing. Runs better than most gear spinners.
To assemble follow the original model instruction:
"Assembly instructions
Note that the Caps and Races look somewhat similar:
The Outer Race has a slightly smaller diameter than the Outer Cap.
The Inner Race has a slightly larger diameter than the Inner Cap
Assembly Steps
Place the Inner Race & Outer Race down (see the note above on telling the difference from the Caps)
Place the Cage, with the ring down.
Place 7 Rollers (small needle nose pliers work well).
Place & snap the Outer Cap on the bearing assembly.
Place & snap the Inner Cap on the bearing assembly.
Check that the Caps are fully seated and flush with the Races." (Text copied from the original model description)
This photos will help you to assemble model:
Have fun!